3-Stage Whole-House Water Purification

Installed at Your Alliance Home

THIS IS WHAT IT LOOKS LIKE ON YOUR ALLIANCE WALL

Three blue housings on a wall-mounted manifold, plumbed into the main line where the water comes into your Alliance home. It’s a compact, tidy install—not a tank sitting in the middle of the garage.

The 3-stage whole-house purification system installed on the exterior wall of a home: three blue filter housings on a wall-mounted manifold, plumbed into the incoming main line. — The 3-stage system installed at a customer’s home in Alliance, Florida.

Mounted, plumbed and pressure-tested by our own crew
Three full-size blue housings on one manifold
Usually finished in a single visit

Three Housings, Not One Cartridge

EACH MEDIUM GETS A FULL-SIZE HOUSING

Single-cartridge systems pack every medium into one shell. This one gives each of the three media its own housing, plumbed in series on a wall-mounted manifold—which means more media volume, more contact time with the water, and longer intervals between changes for Alliance homes. Each cartridge is replaced individually, so you only change what is spent.

1 MPP

Polypropylene Sediment Pre-Filter for Alliance

Model 2045 PP

Takes the physical load first, so the carbon behind it is never wasted on dirt.

2 GAC

Granular Activated Carbon

Model 2045 GAC

The chemical workhorse—volume, surface area, and capacity for the hard stuff in Alliance water.

3 CTO

Compressed Activated Carbon Block (Alliance, FL)

Model 2045 CTO

A dense final pass that leaves no shortcuts for anything still in your Alliance water.

Three full-size housings instead of one shared shell.
More contact time between the water and the media.
Individually replaceable - change only the spent cartridge.
Longer intervals between filter changes.
A far longer chemical reduction list than a single cartridge.
Helps protect your plumbing throughout your Alliance home from the main line onward.

Why Alliance Homeowners Choose Us

BUILT WELL, BACKED PROPERLY IN ALLIANCE

Commercial-grade filtration, installed for Alliance homeowners by a Florida plumbing company that’s been doing this a long time—and stands behind the work.

Professional Grade

Commercial-grade filtration for superior performance in Alliance.

Easy Maintenance

Designed for simple upkeep—easy for busy Alliance households.

Satisfaction Guaranteed

We stand behind our products and quality of service in Alliance, FL.

Trusted by Thousands

Join the homeowners across South Florida—including Alliance—who choose Mr. Pure Water.

Inside the Housings

ALL THREE FILTERS, INSIDE THE BLUE HOUSINGS

Three full-size housings on one manifold, each holding a different medium. Here’s what’s inside each one, in the order your Alliance, Florida water meets it.

X-ray view of the first blue housing, showing the depth-wound polypropylene sediment cartridge inside.

MPP Sediment Pre-Filter

Model 2045 PP

Inside: a depth-wound polypropylene cartridge. Water flows from outer windings to the core, trapping rust, sand, silt, and sediment before the carbon.

X-ray view of the second blue housing, showing the bed of loose granular activated carbon inside.

GAC Granular Activated Carbon for Alliance Homes

Model 2045 GAC

Inside: a full housing of loose carbon granules. The gaps between them are the point—water threads through the bed slowly, giving chlorine, VOCs, and solvents time to adsorb for Alliance households.

X-ray view of the third blue housing, showing the compressed carbon block and its hollow centre channel.

CTO Carbon Block for Alliance Homes

Model 2045 CTO

Inside: carbon compressed into a solid wall around a hollow core. There’s no loose path through it, so the last of the chlorine, fine particles and residual organics have nowhere to slip past.

Untreated water in MPP GAC CTO Clean water to every tap in Alliance

The Chemical Story for Alliance, FL

BUILT FOR SPECIFIC IMPURITIES & CHEMICAL CONCERNS IN ALLIANCE

Most whole-home filters are sold on taste and scale. Our Alliance customers get two full housings of activated carbon that target a longer, more technical list—the contaminants people actually test their water for.

Chlorine & Byproducts

Stages 2 & 3

Chlorine
THMs / Trihalomethanes
Disinfection Byproducts
Chlorine Taste & Odor (Alliance)

Agricultural Chemicals

Stage 2 - GAC

Pesticides
Herbicides
Lawn-Care Runoff
Organic Chemicals

Industrial & Volatile

Stages 2 & 3

Industrial Solvents
VOCs
Residual Organics
Other Dissolved Contaminants

Physical & Particulate

Stages 1 & 3

Rust, Dirt, Sand & Silt
Sediment & Suspended Solids
Pipe Scale Fragments
Microparticles & Fine Particulate

Stage 2 - Loose Granular Carbon (Alliance, FL)

Volume and capacity for Alliance homes

Loose granules pack enormous surface area into the housing.
Water moves through quickly, so flow stays high.
High chemical capacity before the media is spent.
But water can channel through gaps between the granules.

Stage 3 - Compressed Carbon Block

No shortcuts

Carbon compressed into a solid block with no gaps to channel through.
The tight structure also catches fine particulate matter.
Everything that survived stage 2 gets a second, denser pass.
Slower by design - which is exactly why it goes last.

The order is the design

Sediment first, so the expensive carbon is never spent on dirt. Loose granular carbon second, for volume and chemical capacity. Dense carbon block last, for a tight final pass. In that sequence, Alliance homes get the strengths of both carbon types and neither of their weaknesses.

3-STAGE WHOLE-HOUSE

WATER PURIFICATION

MPP · GAC · CTO - THREE HOUSINGS IN SERIES

THIS IS WHAT IT LOOKS LIKE ON YOUR ALLIANCE WALL

EACH MEDIUM GETS A FULL-SIZE HOUSING

Polypropylene Sediment Pre-Filter for Alliance

Granular Activated Carbon

Compressed Activated Carbon Block (Alliance, FL)