3-Stage Whole-House Water Purification

Installed at Your Pine Air Home

THIS IS WHAT IT LOOKS LIKE ON YOUR WALL

Three blue housings on a wall-mounted manifold, plumbed into the main line where water enters your Pine Air home—compact and tidy, not a tank in the garage.

3-stage whole-house purification system installed on a Pine Air home’s exterior wall: three blue filter housings on a wall-mounted manifold tied into the main line. — The 3-stage system installed at a Pine Air home.

Mounted, plumbed, and pressure-tested by our own South Florida crew
Three full-size blue housings on one manifold
Usually finished in a single visit

Three Housings, Not One Cartridge

EACH MEDIUM GETS A FULL-SIZE HOUSING

Single-cartridge systems pack every medium into one shell. This one gives each of the three media its own housing, plumbed in series on a wall-mounted manifold—which means more media volume, more contact time with the water, and longer intervals between changes. That’s a big plus in Pine Air, where water quality can vary depending on municipal supply vs. private well. Each cartridge is replaced individually, so you only change what is spent.

1 MPP

Polypropylene Sediment Pre-Filter

Model 2045 PP

Takes the physical load first, so the carbon behind it is never wasted on dirt—great for Pine Air’s moderate hardness and everyday sediment.

2 GAC

Granular Activated Carbon

Model 2045 GAC

The chemical workhorse—volume, surface area, and capacity for the hard stuff.

3 CTO

Compressed Activated Carbon Block

Model 2045 CTO

A dense final pass—no shortcuts for anything still in your Pine Air water.

Three full-size housings instead of one shared shell.
More contact time between the water and the media.
Individually replaceable — change only the spent cartridge.
Longer intervals between filter changes.
A far longer chemical reduction list than a single cartridge—ideal for Pine Air water.
Helps protect your plumbing from the main line onward—great for Pine Air homes.

Why Pine Air Homeowners Choose Us

BUILT WELL, BACKED PROPERLY

Commercial-grade filtration, installed by a Florida plumbing company that knows Pine Air water - and stands behind the work.

Professional Grade

Commercial-grade filtration for superior performance in Pine Air, Florida.

Easy Maintenance

Designed for simple upkeep—ideal for Pine Air homes on city water or private wells.

Satisfaction Guaranteed

We stand behind our products and the quality of service we deliver in Pine Air.

Trusted by Thousands

Join the homeowners across South Florida—including Pine Air—who choose Mr. Pure Water.

Inside the Housings

ALL THREE FILTERS, INSIDE THE BLUE HOUSINGS

Three full-size housings on one manifold, each holding a different medium. Here is what sits inside each one, in the order your Pine Air water meets it.

X-ray view of the first blue housing, showing the depth-wound polypropylene sediment cartridge inside.

MPP Sediment Pre-Filter

Model 2045 PP

Inside: a depth-wound polypropylene cartridge. Water moves from the outer windings toward the core, so rust, sand, silt, and sediment are trapped before they reach the carbon.

X-ray view of the second blue housing, showing the bed of loose granular activated carbon inside.

GAC Granular Activated Carbon

Model 2045 GAC

Inside: a full housing of loose carbon granules. The gaps between them are the point—water threads through the bed slowly, giving chlorine, VOCs, and solvents time to adsorb (great when Pine Air homes are on city water or well water).

X-ray view of the third blue housing, showing the compressed carbon block and its hollow centre channel.

CTO Carbon Block

Model 2045 CTO

Inside: carbon compressed into a solid wall around a hollow core. No loose path through it—so leftover chlorine, fine particles, and residual organics can’t slip past.

Untreated water in MPP GAC CTO Clean water to every Pine Air tap

The Chemical Story

BUILT FOR SPECIFIC IMPURITIES & CHEMICAL CONCERNS

Most whole-home filters are sold on taste and scale. Two full housings of activated carbon let this one go after a much longer and more technical list - the contaminants Pine Air homeowners often get their water tested for.

Chlorine & Byproducts

Stages 2 & 3

Chlorine
THMs / Trihalomethanes
Disinfection Byproducts
Chlorine Taste & Odor

Agricultural Chemicals

Stage 2 - GAC

Pesticides
Herbicides
Lawn-Care Runoff
Organic Chemicals

Industrial & Volatile

Stages 2 & 3

Industrial Solvents
VOCs
Residual Organics
Other Dissolved Contaminants

Physical & Particulate

Stages 1 & 3

Rust, Dirt, Sand & Silt
Sediment & Suspended Solids
Pipe Scale Fragments
Microparticles & Fine Particulate

Stage 2 - Loose Granular Carbon (GAC)

Volume and capacity

Loose granules pack enormous surface area into the housing.
Water moves through quickly, so flow stays high.
High chemical capacity before the media is spent.
But water can channel through gaps between the granules.

Stage 3 - Compressed Carbon Block

No shortcuts

Carbon compressed into a solid block with no gaps to channel through.
The tight structure also catches fine particulate matter.
Everything that survived stage 2 gets a second, denser pass.
Slower by design - which is exactly why it goes last.

The order is the design

Sediment first, so the expensive carbon is never spent on dirt. Loose granular carbon second, for volume and chemical capacity. Dense carbon block last, for a tight final pass. In that sequence, Pine Air homeowners get the strengths of both carbon types—without the tradeoffs.

3-STAGE WHOLE-HOUSE

WATER PURIFICATION

MPP · GAC · CTO - THREE HOUSINGS IN SERIES

THIS IS WHAT IT LOOKS LIKE ON YOUR WALL

EACH MEDIUM GETS A FULL-SIZE HOUSING

Polypropylene Sediment Pre-Filter

Granular Activated Carbon

Compressed Activated Carbon Block