3-Stage Whole-House Water Purification

Installed at Your Saga Bay Home

THIS IS WHAT IT LOOKS LIKE ON YOUR WALL IN SAGA BAY

Three blue housings on a wall-mounted manifold, plumbed into the main line where the water comes into your Saga Bay home. It’s a compact, tidy install — not a tank taking up space in the garage.

The 3-stage whole-house purification system installed on the exterior wall of a Saga Bay home: three blue filter housings on a wall-mounted manifold, plumbed into the incoming main line. — The 3-stage system installed at a Saga Bay customer’s home.

Mounted, plumbed and pressure-tested by our own South Florida crew
Three full-size blue housings on one manifold
Usually finished in a single visit in Saga Bay

Three Housings, Not One Cartridge

EACH MEDIUM GETS A FULL-SIZE HOUSING

Single-cartridge systems pack every medium into one shell. This one gives each of the three media its own housing, plumbed in series on a wall-mounted manifold — more media volume, more contact time with the water, and longer intervals between changes. Each cartridge is replaced individually, so you only change what is spent.

1 MPP

Polypropylene Sediment Pre-Filter

Model 2045 PP

Takes the physical load first, so the carbon behind it is never wasted on dirt — especially helpful with hard South Florida water.

2 GAC

Granular Activated Carbon

Model 2045 GAC

The chemical workhorse — volume, surface area and capacity for the hard stuff in South Florida municipal water.

3 CTO

Compressed Activated Carbon Block

Model 2045 CTO

A dense final pass that leaves no shortcuts for anything still in the water—tap to tap.

Three full-size housings instead of one shared shell—built for whole-home use.
More contact time between the water and the media—great for South Florida supplies.
Individually replaceable — change only the spent cartridge.
Longer intervals between filter changes.
A far longer chemical reduction list than a single cartridge—ideal for South Florida water.
Helps protect your plumbing from the main line onward—great for Saga Bay homes.

Why Saga Bay Homeowners Choose Us

BUILT WELL, BACKED PROPERLY

Commercial-grade filtration, installed by a South Florida plumbing company that’s been doing this a long time — and stands behind the work.

Professional Grade

Commercial-grade filtration built for Saga Bay water.

Easy Maintenance

Designed for simple upkeep—ideal for busy Saga Bay households.

Satisfaction Guaranteed

We stand behind our products and the quality of service we bring to Saga Bay.

Trusted Across Southern Miami-Dade

Join the homeowners across South Florida — including Saga Bay — who choose Mr. Pure Water.

Inside the Housings

ALL THREE FILTERS, INSIDE THE BLUE HOUSINGS

Three full-size housings on one manifold, each holding a different medium. Here’s what sits inside each one, in the order your Saga Bay water meets it.

X-ray view of the first blue housing, showing the depth-wound polypropylene sediment cartridge inside (helpful for hard South Florida water).

MPP Sediment Pre-Filter

Model 2045 PP

Inside: a depth-wound polypropylene cartridge. Water flows from the outer windings to the core, trapping rust, sand, silt and sediment before it reaches the carbon.

X-ray view of the second blue housing, showing loose granular activated carbon media inside.

GAC Granular Activated Carbon

Model 2045 GAC

Inside: a full housing of loose carbon granules. The gaps between them are the point — water threads through the bed slowly, giving chlorine, VOCs and solvents time to adsorb.

X-ray view of the third blue housing, showing the compressed carbon block and its hollow center channel.

CTO Carbon Block

Model 2045 CTO

Inside: carbon compressed into a solid wall around a hollow core. There is no loose path through it, so the last of the chlorine, fine particles and residual organics have nowhere to slip past.

Untreated water in MPP GAC CTO Clean water to every tap in Saga Bay

The Chemical Story

BUILT FOR SPECIFIC IMPURITIES & CHEMICAL CONCERNS IN SAGA BAY

Most whole-home filters are sold on taste and scale. With hard South Florida water, two full housings of activated carbon help target a longer, more technical list.

Chlorine & Byproducts

Stages 2 & 3

Chlorine
THMs / Trihalomethanes
Disinfection Byproducts
Chlorine Taste & Odor

Agricultural Chemicals

Stage 2 - GAC

Pesticides
Herbicides
Lawn-Care Runoff
Organic Chemicals

Industrial & Volatile

Stages 2 & 3

Industrial Solvents
VOCs
Residual Organics
Other Dissolved Contaminants

Physical & Particulate

Stages 1 & 3

Rust, Dirt, Sand & Silt
Sediment & Suspended Solids
Pipe Scale Fragments (Hard Water)
Microparticles & Fine Particulate

Stage 2 - Loose Granular Carbon (GAC)

Volume and capacity

Loose granules pack enormous surface area into the housing.
Water moves through quickly, so flow stays high.
High chemical capacity before the media is spent.
But water can channel through gaps between the granules.

Stage 3 - Compressed Carbon Block

No shortcuts

Carbon compressed into a solid block with no gaps to channel through.
The tight structure also catches fine particulate matter—great for clear water at every tap.
Everything that survived stage 2 gets a second, denser pass.
Slower by design — which is exactly why it goes last.

The order is the design

Sediment first, so the expensive carbon is never spent on dirt. Loose granular carbon second, for volume and chemical capacity. Dense carbon block last, for a tight final pass — ideal for South Florida municipal water.

3-STAGE WHOLE-HOUSE

WATER PURIFICATION

MPP · GAC · CTO - THREE HOUSINGS IN SERIES

THIS IS WHAT IT LOOKS LIKE ON YOUR WALL IN SAGA BAY

EACH MEDIUM GETS A FULL-SIZE HOUSING

Polypropylene Sediment Pre-Filter

Granular Activated Carbon

Compressed Activated Carbon Block