3-Stage Whole-House Water Purification

Installed at Your Southmere Home

THIS IS WHAT IT LOOKS LIKE ON YOUR WALL IN SOUTHMERE

Three blue housings on a wall-mounted manifold, plumbed into the main line where water enters your Southmere home. It’s a compact, tidy install—not a tank taking over the garage.

The 3-stage whole-house purification system installed on an exterior wall of a Southmere home: three blue filter housings on a wall-mounted manifold, plumbed into the incoming main line. — The 3-stage system installed at a customer’s home in Southmere.

Mounted, plumbed and pressure-tested by our own crew
Three full-size blue housings on one manifold
Usually finished in a single visit

Three Housings, Not One Cartridge

EACH MEDIUM GETS A FULL-SIZE HOUSING

Single-cartridge systems pack every medium into one shell. This one gives each of the three media its own housing, plumbed in series on a wall-mounted manifold—more media volume, more contact time with the water, and longer intervals between changes. Each cartridge is replaced individually, so you only change what is spent—an ideal setup for Southmere homes dealing with hard-water scale from South Florida source water like the Biscayne Aquifer.

1 MPP

Polypropylene Sediment Pre-Filter

Model 2045 PP

Takes the physical load first, so the carbon behind it isn’t wasted on Southmere’s grit and scale.

2 GAC

Granular Activated Carbon

Model 2045 GAC

The chemical workhorse—built for the volume and capacity Southmere homes need.

3 CTO

Compressed Activated Carbon Block

Model 2045 CTO

A dense final pass that leaves no shortcuts—great for Southmere’s hard-water concerns.

Three full-size housings instead of one shared shell.
More contact time between the water and the media.
Individually replaceable - change only the spent cartridge.
Longer intervals between filter changes.
A far longer chemical reduction list than a single cartridge.
Helps protect your plumbing from hard-water scale from the main line onward.

Why Southmere Homeowners Choose Us

BUILT WELL, BACKED PROPERLY

Commercial-grade filtration, installed by a Florida plumbing company that knows South Florida water—and stands behind the work.

Professional Grade

Commercial-grade filtration built for Southmere’s hard water.

Easy Maintenance

Designed for simple upkeep—ideal for busy Southmere households.

Satisfaction Guaranteed

We stand behind our products and the quality of service we provide in Southmere.

Trusted by South Florida Homeowners

Join the homeowners across South Florida who trust Mr. Pure Water for cleaner water in Southmere.

Inside the Housings

ALL THREE FILTERS, INSIDE THE BLUE HOUSINGS

Three full-size housings on one manifold, each holding a different medium—set up for Southmere’s hard water. Here’s what sits inside each one, in the order your water meets it.

X-ray view of the first blue housing, showing the depth-wound polypropylene sediment cartridge inside for Southmere’s hard-water conditions.

MPP Sediment Pre-Filter

Model 2045 PP

Inside: a depth-wound polypropylene cartridge. Water flows from the outer windings toward the core, trapping rust, sand, silt and sediment before they can reach the carbon.

X-ray view of the second blue housing, showing the bed of loose granular activated carbon inside.

GAC Granular Activated Carbon

Model 2045 GAC

Inside: a full housing of loose carbon granules. Water threads through slowly, giving chlorine, VOCs and solvents time to adsorb—ideal for South Florida aquifer-sourced water.

X-ray view of the third blue housing, showing the compressed carbon block and its hollow center channel for Southmere whole-home filtration.

CTO Carbon Block

Model 2045 CTO

Inside: carbon compressed into a solid wall around a hollow core. With no loose path through it, the last of the chlorine, fine particles and residual organics have nowhere to slip past—perfect for Southmere water.

Untreated water in MPP GAC CTO Clean water to every tap in Southmere

The Chemical Story

BUILT FOR SOUTHMERE-SPECIFIC IMPURITIES & CHEMICAL CONCERNS

In Southmere, whole-home filters are often sold on taste and hard-water scale. With two full housings of activated carbon, this system targets a longer, more technical list—the contaminants people here actually test their water for.

Chlorine & Byproducts

Stages 2 & 3

Chlorine
THMs / Trihalomethanes
Disinfection Byproducts
Chlorine Taste & Odor

Agricultural Chemicals

Stage 2 - GAC

Pesticides
Herbicides
Lawn-Care Runoff
Organic Chemicals

Industrial & Volatile

Stages 2 & 3

Industrial Solvents
VOCs
Residual Organics
Other Dissolved Contaminants

Physical & Particulate

Stages 1 & 3

Rust, Dirt, Sand & Silt
Sediment & Suspended Solids
Hard-water scale fragments
Microparticles & Fine Particulate

Stage 2 - Loose Granular Carbon

Volume and capacity

Loose granules pack enormous surface area into the housing.
Water moves through quickly, so flow stays high.
High chemical capacity before the media is spent.
But water can channel through gaps between the granules.

Stage 3 - Compressed Carbon Block

No shortcuts

Carbon compressed into a solid block with no gaps to channel through.
The tight structure also catches fine particulate matter.
Everything that survived stage 2 gets a second, denser pass.
Slower by design - which is exactly why it goes last.

The order is the design

Sediment first, so the expensive carbon is never spent on dirt. Loose granular carbon second, for volume and chemical capacity. Dense carbon block last, for a tight final pass—ideal for Southmere’s hard-water conditions.

3-STAGE WHOLE-HOUSE

WATER PURIFICATION

MPP · GAC · CTO — THREE HOUSINGS IN SERIES

THIS IS WHAT IT LOOKS LIKE ON YOUR WALL IN SOUTHMERE

EACH MEDIUM GETS A FULL-SIZE HOUSING

Polypropylene Sediment Pre-Filter

Granular Activated Carbon

Compressed Activated Carbon Block