3-Stage Whole-House Water Purification

Installed at Your Thompson Home

THIS IS WHAT IT LOOKS LIKE ON YOUR WALL IN THOMPSON

Three blue housings on a wall-mounted manifold, plumbed into the main line where water enters your Thompson home—compact and tidy, not a tank in the garage.

The 3-stage whole-house purification system installed on the exterior wall of a Thompson, FL home: three blue filter housings on a wall-mounted manifold, plumbed into the incoming main line. — The 3-stage system installed at a Thompson-area home.

Mounted, plumbed and pressure-tested by our own crew
Three full-size blue housings on one manifold
Usually finished in a single visit for Thompson homeowners

Three Housings, Not One Cartridge

EACH MEDIUM GETS A FULL-SIZE HOUSING

Single-cartridge systems pack every medium into one shell. This Thompson-ready setup gives each of the three media its own housing, plumbed in series on a wall-mounted manifold—more media volume, more contact time, and longer intervals between changes. Each cartridge is replaced individually, so you only change what’s spent.

1 MPP

Polypropylene Sediment Pre-Filter

Model 2045 PP

Takes the physical load first—helpful when heavy Florida rains stir up sediment.

2 GAC

Granular Activated Carbon

Model 2045 GAC

The chemical workhorse—built to handle Florida’s mineral-rich groundwater and the hard stuff that affects taste.

3 CTO

Compressed Activated Carbon Block

Model 2045 CTO

A dense final pass that leaves no shortcuts for anything still in your Thompson water.

Three full-size housings instead of one shared shell.
More contact time between the water and the media.
Individually replaceable - change only the spent cartridge.
Longer intervals between filter changes—even with seasonal heavy rains.
A far longer chemical reduction list than a single cartridge.
Helps protect your plumbing from the main line onward—great for Thompson homes.

Why Thompson Homeowners Choose Us

BUILT WELL, BACKED PROPERLY

Commercial-grade filtration, installed by a Florida plumbing company that’s been doing this a long time—and stands behind the work for Thompson homeowners.

Professional Grade

Commercial-grade filtration built for Thompson’s humid subtropical climate and changing water conditions.

Easy Maintenance

Designed for simple upkeep to save Thompson homeowners time and money.

Satisfaction Guaranteed

We stand behind our products and the quality of our service in Thompson, FL.

Trusted by Thompson Homeowners

Join the homeowners across South Florida—including Thompson—who choose Mr. Pure Water.

Inside the Housings

ALL THREE FILTERS, INSIDE THE BLUE HOUSINGS

Three full-size housings on one manifold, each holding a different medium—built for the water conditions we see around Thompson, Florida. Here’s what’s inside each one, in order.

X-ray view of the first blue housing, showing the depth-wound polypropylene sediment cartridge inside.

MPP Sediment Pre-Filter

Model 2045 PP

Inside: a depth-wound polypropylene cartridge. In Thompson’s rainy seasons, it helps trap rust, sand, silt and sediment before they can reach the carbon.

X-ray view of the second blue housing, showing the bed of loose granular activated carbon (GAC) inside.

GAC Granular Activated Carbon

Model 2045 GAC

Inside: a full housing of loose carbon granules. The gaps between them are the point—water threads through the bed slowly, giving chlorine, VOCs and solvents time to adsorb.

X-ray view of the third blue housing, showing the compressed carbon block and its hollow center channel.

CTO Carbon Block

Model 2045 CTO

Inside: carbon compressed into a solid wall around a hollow core. There is no loose path through it, so the last of the chlorine, fine particles and residual organics have nowhere to slip past—helpful during Florida’s heavy-rain seasons.

Untreated water in MPP GAC CTO Clean water to every tap in Thompson

The Chemical Story

BUILT FOR SPECIFIC IMPURITIES & CHEMICAL CONCERNS IN THOMPSON

Most whole-home filters are sold on taste and scale. With Florida’s mineral-rich groundwater and seasonal heavy rains that can impact water quality, this system goes after what people actually test for.

Chlorine & Byproducts

Stages 2 & 3

Chlorine
THMs / Trihalomethanes
Disinfection Byproducts
Chlorine Taste & Odor

Agricultural Chemicals

Stage 2 - GAC

Pesticides
Herbicides
Lawn-Care Runoff
Organic Chemicals

Industrial & Volatile

Stages 2 & 3

Industrial Solvents
VOCs
Residual Organics
Other Dissolved Contaminants

Physical & Particulate

Stages 1 & 3

Rust, Dirt, Sand & Silt
Sediment & Suspended Solids (common after heavy Florida rains)
Pipe Scale Fragments
Microparticles & Fine Particulate

Stage 2 - Loose Granular Carbon

Volume and capacity

Loose granules pack enormous surface area into the housing.
Water moves through quickly, so flow stays high.
High chemical capacity before the media is spent.
But water can channel through gaps between the granules.

Stage 3 - Compressed Carbon Block

No shortcuts

Carbon compressed into a solid block with no gaps to channel through.
The tight structure also catches fine particulate matter.
Everything that survived stage 2 gets a second, denser pass.
Slower by design—perfect for Thompson’s mineral-rich groundwater, so it goes last.

The order is the design

Sediment first, so the expensive carbon is never spent on dirt. Loose granular carbon second, for volume and chemical capacity. Dense carbon block last, for a tight final pass—ideal for Thompson’s humid subtropical weather and seasonal heavy rains. Run in that sequence, you get the strengths of both carbon types and neither of their weaknesses.

3-STAGE WHOLE-HOUSE

WATER PURIFICATION

MPP · GAC · CTO — Three Housings in Series

THIS IS WHAT IT LOOKS LIKE ON YOUR WALL IN THOMPSON

EACH MEDIUM GETS A FULL-SIZE HOUSING

Polypropylene Sediment Pre-Filter

Granular Activated Carbon

Compressed Activated Carbon Block