Most Broward Highlands homeowners searching for a whole-house reverse osmosis system are really searching for one thing: bottled-water quality at every tap, not just the one under the kitchen sink. Here is how whole-home RO actually works, where it struggles, and why Reactive Osmosis (RO2) is the way we install it in Broward County.
What is a whole house reverse osmosis system in Broward Highlands?
A whole-house reverse osmosis system treats water where it enters the home—at the main line—so every fixture is fed purified water: kitchen, bathrooms, laundry, ice maker, and outdoor spigots alike. That’s the difference between whole-home reverse osmosis and a point-of-use RO unit, which purifies a single faucet and leaves the rest of the house on untreated water—something many Broward Highlands homes notice with South Florida’s typically hard, limestone-aquifer water.
Why traditional whole house RO is tough in Broward County homes
A true reverse osmosis membrane produces water slowly and under pressure, so a whole house RO system has to bank it: a large pressurized storage tank, a booster pump to refill it, and a brine line that sends a significant share of your incoming water to the drain. Run two showers and the dishwasher at once and you can outrun the tank. The equipment footprint, the wasted water and the pump are the three reasons most homeowners abandon the idea—especially in hot, humid South Florida homes where demand can spike.
How Reactive Osmosis (RO2) is different for Broward County homes
Reactive Osmosis reaches reverse osmosis quality water by filtration rather than by pressurized rejection—ideal for Broward County homes dealing with hard, limestone-aquifer water. Multi-stage media—a 5-micron sediment pre-filter, KDF-55 copper-zinc redox alloy, and a 0.5-micron carbon block—handle sediment, chlorine, heavy metals, VOCs, taste, and odor. A hollow-fiber membrane with pores at or under 0.01 microns then blocks bacteria, cysts, colloids, microplastics, and many viruses outright. No storage tank, no booster pump, no brine line, and 15 gallons per minute on demand.
Does whole house RO remove fluoride, chlorine and heavy metals in Broward Highlands?
Chlorine, chloramine byproducts, hydrogen sulfide, VOCs, pesticides, and dissolved heavy metals such as lead, mercury, nickel, and chromium are handled by the KDF-55 and carbon stages. Bacteria, cysts, microplastics, turbidity, and fine suspended solids are blocked by the membrane. Dissolved salts and TDS are the honest exception—lowering those takes a true RO membrane, which is the tradeoff you make in exchange for losing the tank, the pump, and the brine (a big plus for Broward County homes).
How much does a whole house reverse osmosis system cost in Broward Highlands?
Whole home reverse osmosis systems commonly run several thousand dollars once the tank, pump, plumbing and labor are counted. Our complete whole-house Reactive Osmosis (RO2) system is $2,995 installed - regularly $5,000, so you save $2,005. That price includes the cartridge housings, manifold, membrane vessel, professional installation in Broward Highlands, a water test and a system check before we leave.
City water or well water in Broward County—where we install
On municipal supplies, the KDF-55 and carbon stages take on chlorine, disinfection byproducts, taste, and odor at the main line. In Broward County, hard water from limestone-based aquifers can also contribute to mineral scale—so better filtration helps protect plumbing and appliances. On rural wells and sediment-prone plumbing, the 5-micron pre-filter and the membrane handle silt, rust, turbidity, and biological contamination together. We install whole-house reverse osmosis quality systems across Broward County and South Florida, usually in a single visit.