Most Montbrook homeowners looking for a whole-house reverse osmosis system want one thing: bottled-water quality at every tap—not just under the kitchen sink. Here’s how whole-home RO works, where it struggles on hard Floridan aquifer well water, and why Reactive Osmosis (RO2) is how we install it.
What is a whole house reverse osmosis system?
A whole house reverse osmosis system treats water where it enters the home, at the main line, so every fixture is fed purified water—kitchen, bathrooms, laundry, ice maker, and outdoor spigots alike. That’s a big deal for Montbrook homes on private wells, because it means better water everywhere—not just at one sink.
Why traditional whole house RO is hard to live with
A true reverse osmosis membrane produces water slowly and under pressure, so a whole-house RO system has to bank it: a large pressurized storage tank, a booster pump to refill it, and a brine line that sends a significant share of your incoming water to the drain. In Montbrook—where many homes are on private wells—running two showers and the dishwasher at once can outrun the tank. The footprint, wasted water, and the pump are why many homeowners abandon the idea.
How Reactive Osmosis (RO2) is different
Reactive Osmosis reaches reverse osmosis quality water by filtration rather than by pressurized rejection. Multi-stage media—a 5-micron sediment pre-filter, KDF-55 copper-zinc redox alloy and a 0.5-micron carbon block—handle sediment and the taste/odor issues common in Floridan aquifer well water, plus heavy metals and VOCs. A hollow-fiber membrane with pores at or under 0.01 microns then blocks bacteria, cysts, colloids, microplastics and many viruses outright. No storage tank, no booster pump, no brine line, and 15 gallons per minute on demand—ideal for Montbrook homes on private wells.
Does whole house RO remove fluoride, chlorine and heavy metals?
Chlorine, chloramine byproducts, hydrogen sulfide, VOCs, pesticides, and dissolved heavy metals like lead, mercury, nickel, and chromium are handled by the KDF-55 and carbon stages. Bacteria, cysts, microplastics, turbidity, and fine suspended solids are blocked by the membrane. Dissolved salts and TDS are the honest exception—lowering those takes a true RO membrane, which is the tradeoff you make in exchange for losing the tank, the pump, and the brine.
How much does a whole house reverse osmosis system cost in Montbrook?
Whole home reverse osmosis systems commonly run several thousand dollars once the tank, pump, plumbing and labor are counted. Our complete whole-house Reactive Osmosis (RO2) system is $2,995 installed—regularly $5,000, so you save $2,005. That price includes the cartridge housings, manifold, membrane vessel, professional installation, a water test and a system check before we leave your Montbrook, Florida home.
City water or Floridan-aquifer well water—and where we install
On municipal supplies, the KDF-55 and carbon stages take on chlorine, disinfection byproducts, taste, and odor at the main line. On Montbrook-area private wells drawing from the Floridan aquifer, the 5-micron pre-filter and membrane handle silt, rust, turbidity, and biological contamination together—while also helping with the iron/sulfur issues many homeowners notice. We install whole house RO-quality systems across Levy County, usually in a single visit.