Phone: 772-290-5223
info@bestwaterheater.com
Phone: 772-290-5223
info@bestwaterheater.com
Phone: 772-290-5223
info@bestwaterheater.com
It's not just filtration, it's transformation. Softer water and scale protection for the whole house - without salt tanks, chemicals or cartridges to replace.
Advanced Technology Inside
Proprietary reverse-ionization technology physically decomposes hard water minerals down to a molecular level while exchanging their ionic charge, using a controlled electromagnetic field to restructure water into a balanced, healthier state - without salt, chemicals or filters. It softens water and prevents scale without the salt tanks or pressure pumps most water softeners require.
Creates a controlled turbulence zone for maximum contact and efficiency.
Breaks down hardness physically through catalytic media decomposition, without chemicals.
Creates ionization and enhances the transfer and efficiency of all ions.
Stabilizes and conditions the water before it exits the system.
Technical Specifications
Premium 304 stainless steel, no external power supply, no chemicals and no wastewater. The internal alloy keeps releasing electrons for up to ten years with no disassembly and no routine maintenance in that time.
86%
Scale inhibition rate
17.6 GPM
Flow rate
10 yr
Alloy service life
0 W
External power needed
Fits most standard pipes, plumbed in where the water enters the home.
Treats water mains up to three kilometres in length.
The recommended water hardness range for the system.
A stainless steel body built to sit on your main line for the long haul.
No outlet, no controller, nothing to reset after an outage.
Nothing is discharged to a drain, and healthy minerals stay in the water.
Limited-Time Offer
$895
Installed
Regularly
Stainless conditioning unit, fittings, mounting hardware & all parts.
Plumbed into your main line and commissioned by professionals.
We test your water so you know what you are starting from.
No surprises. One low price includes everything.
No salt to buy, no filters to replace and no electricity to run.
Treated at the source, for the whole home.
How It Works
Hard water enters the system carrying calcium, magnesium and other minerals, and leaves clean, soft, scale-free and corrosion-resistant.
Decomposition and charge exchange, not ion swapping
The alloy inside the device changes the structure of the metal ions passing through it, leaving calcium and magnesium ions unable to crystallize. Preventing those ions from combining with acid radical ions is what produces the scale inhibition effect. An internal diversion device pressurizes the water flow and brings it into full contact with the alloy, so the alloy releases free electrons efficiently.
Hard water enters the system carrying calcium, magnesium and other minerals.
A catalytic core physically decomposes minerals, breaking them down into microscopic particles and ions.
Ionic charge is exchanged and minerals are reorganized with water molecules at the microscopic level.
Water exits clean, soft, scale-free and corrosion-resistant.
It works on the scale you already have
The system prevents and reduces the formation of new scale, and it also softens and removes scale that has already built up inside your plumbing.
Mineral Decomposition & Ion Exchange
The minerals are not stripped out and swapped for sodium. They are decomposed, recharged and reorganized - which is why the water leaves balanced rather than stripped.
Why It's Different
Most water softeners need a brine tank, a drain line and a power supply, and most filters need replacing. This system needs none of it, which is where the running cost goes.
| What it takes to run | Conventional Softener | Reverse Ionization This System |
|---|---|---|
| Salt | Bags of brine to buy, carry and refill | No salt, no backwash, no mess |
| Chemicals | Additives and by-products to manage | No additives and no by-products |
| Electricity | An outlet and a controller to reset | Works 24/7 automatically, unpowered |
| Filters | Cartridges on a replacement schedule | Nothing to replace |
| Upkeep | Regeneration cycles and routine service | High performance with no routine upkeep |
| Running cost | Salt, power and consumables every year | Lower utility and repair costs |
| Build | Tanks, valves and moving parts | Premium 304 stainless steel |
Swipe the table sideways to compare both columns.
Installed for $895 - regularly $1,500.
One stainless unit, plumbed in at the main line, conditioning every tap in the house with a 86% scale inhibition rate and a 17.6 GPM flow rate. It suits city or well water in homes with hardness below 300 ppm. If you are not sure how hard your water actually is, we will test it as part of the visit.
Key Benefits
Scale is what quietly costs you money - in pressure, in appliance life and in repair bills. This is what changes once the water stops depositing it.
Results vary with source water and household usage. We test your water on the visit so you know what you are starting from.
Ideal For
It sits on the main line, so everything downstream of it is treated - the plumbing itself, the appliances that heat and hold the water, and the irrigation outside.
Cleaner Water. Better Living.
Installed by a Florida plumbing company that has been doing this a long time - and stands behind the work.
A premium 304 stainless body with an internal alloy rated for up to ten years of service.
No salt, no power, no filters and no regeneration cycle - very little to think about.
We stand behind our products and quality of service.
Join the homeowners across South Florida who choose Mr. Pure Water.
Cleaner Water. Better Living.
Conditioned water is gentler to wash in, so skin and hair are left feeling softer rather than stripped.
Helps eliminate the spotting and buildup that fogs shower glass and rings your fixtures.
Soap and detergent work more efficiently, so you use less of both and rinse cleaner.
The Mr. Pure Water Whole-House Reverse-Ionization System treats your water at the main line, and it does it without salt, chemicals, filters or a power supply. Hard water enters carrying calcium, magnesium, iron and heavy metals. Inside the premium 304 stainless body, a turbulent flow chamber brings the water into full contact with a catalytic core that physically decomposes those minerals into microscopic particles and ions. A controlled electromagnetic field then exchanges their ionic charge and reverses their polarization, reorganizing the minerals with the water molecules so they can no longer crystallize or combine with acid radical ions - which is what produces the 86% scale inhibition effect. A polished flow chamber stabilizes the water before it exits, and it exits clean, soft, scale-free and corrosion-resistant with its healthy minerals intact. The internal alloy keeps releasing free electrons for up to ten years with no disassembly and no routine maintenance, at a 17.6 GPM flow rate, with no wastewater and nothing discharged to a drain.
Prevents new scale and helps break down the deposits already inside your pipes.
Clearing scale out of the pipes keeps water moving the way it should.
Helps eliminate the hard water spotting on dishes, glassware and fixtures.
Keeps scale off the heating elements in water heaters, dishwashers and washers.
Detergent lathers and rinses better, so you use less of it every wash.
No salt, no filters and no service calls for up to ten years of operation.
Limited-Time Offer
$895
Installed
Regularly
772-290-5223
info@bestwaterheater.com
