It’s not just filtration—it’s transformation. Softer water and scale protection for your whole Ashmore home, without salt tanks, chemicals, or cartridges to replace.
Advanced Technology Inside
Proprietary reverse-ionization technology physically decomposes hard water minerals down to a molecular level while exchanging their ionic charge, using a controlled electromagnetic field to restructure water into a balanced, healthier state—without salt, chemicals, or filters. It softens water and helps prevent scale without the salt tanks or pressure pumps most water softeners require.
Creates a controlled turbulence zone for maximum contact and efficiency in your Ashmore water line.
Breaks down hardness physically through catalytic media decomposition—no chemicals needed for Ashmore homes.
Creates ionization and enhances the transfer and efficiency of all ions.
Stabilizes and conditions the water before it exits the system in your Ashmore home.
Technical Specifications
Premium 304 stainless steel—no external power supply, no chemicals, and no wastewater. The internal alloy keeps releasing electrons for up to ten years with no disassembly and no routine maintenance in that time.
86%
Scale inhibition rate
17.6 GPM
Flow rate
10 yr
Alloy service life
0 W
External power needed
Fits most standard pipes, plumbed in where the water enters your Ashmore home.
Treats water mains up to three kilometres in length.
The recommended water hardness range for your Ashmore system.
A stainless steel body built to sit on your Ashmore main line for the long haul.
No outlet, no controller, nothing to reset after an outage—simple for Ashmore homes.
Nothing is discharged to a drain, and healthy minerals stay in your Ashmore water.
Limited-Time Offer
$895
Installed
Regularly

Stainless conditioning unit, fittings, mounting hardware, and all parts—installed for Ashmore homes.

Plumbed into your main line and commissioned by Ashmore water pros.

We test your water in Ashmore so you know exactly what you’re starting from.

No surprises—one low price includes everything for your Ashmore install.

No salt to buy, no filters to replace, and no electricity to run—great for Ashmore homes.

Treated at the source, for your whole Ashmore home.
How It Works
Hard water enters the system carrying calcium, magnesium, and other minerals—then leaves clean, soft, scale-free, and corrosion-resistant for your Ashmore home.
Decomposition and charge exchange, not ion swapping
The alloy inside the device changes the structure of the metal ions passing through it, leaving calcium and magnesium ions unable to crystallize. Preventing those ions from combining with acid radical ions is what produces the scale inhibition effect. An internal diversion device pressurizes the water flow and brings it into full contact with the alloy, so the alloy releases free electrons efficiently.
Hard water can enter Ashmore homes carrying calcium, magnesium, and other minerals.
A catalytic core physically decomposes minerals, breaking them down into microscopic particles and ions.
Ionic charge is exchanged, and minerals are reorganized with water molecules at the microscopic level.
Water exits clean, soft, scale-free, and corrosion-resistant—ready for everyday use in Ashmore.
It works on the scale you already have—right in your Ashmore plumbing.
The system helps prevent new scale and can reduce existing buildup inside your plumbing—great for protecting an Ashmore home’s pipes and fixtures.
Mineral Decomposition & Ion Exchange
The minerals are not stripped out and swapped for sodium. They’re decomposed, recharged, and reorganized—so the water in your Ashmore home leaves balanced rather than stripped.
Why It's Different
Most water softeners need a brine tank, a drain line, and a power supply—and most filters need replacing. This system needs none of it, which helps keep costs down for Ashmore homeowners.
| What it takes to run in Ashmore | Conventional Softener | Reverse Ionization This System |
|---|---|---|
| Salt | No brine bags to buy, haul, and refill in Ashmore | No salt, no backwash, no mess |
| Chemicals | Additives and by-products to manage | No additives and no by-products |
| Electricity | No outlet needed and no controller to reset | Works 24/7 automatically, unpowered |
| Filters | Cartridges on a replacement schedule (great for busy Ashmore homes) | Nothing to replace |
| Upkeep | Regeneration cycles and routine service | High performance with no routine upkeep |
| Running cost | Salt, power and consumables every year | Lower utility and repair costs |
| Build | Tanks, valves and moving parts | Premium 304 stainless steel |
Swipe the table sideways to compare both columns.
Installed in Ashmore for $895 - regularly $1,500.
One stainless unit, plumbed in at the main line, conditioning every tap in your Ashmore home with an 86% scale inhibition rate and a 17.6 GPM flow rate. It suits city or well water in homes with hardness below 300 ppm. If you’re not sure how hard your water is, we’ll test it as part of the visit.
Key Benefits
Scale is what quietly costs you money—water pressure, appliance life, and repair bills. Here’s what changes for Ashmore homes once water stops depositing it.
Results vary with source water and household usage. We test your water during your Ashmore visit so you know what you’re starting from.
Ideal For
Installed on your main line, it treats everything downstream—your plumbing, water-using appliances, and even the irrigation outside around your Ashmore home.
Cleaner Water. Better Living in Ashmore.
Installed by a Florida plumbing company that’s done this for years—and stands behind the work for Ashmore homeowners.
A premium 304 stainless body with an internal alloy rated for up to ten years of service.
No salt, no power, no filters, and no regeneration cycle—easy for Ashmore homeowners.
We stand behind our products and the quality of our service in Ashmore.
Join the homeowners across Florida—including right here in Ashmore—who choose Mr. Pure Water.
Cleaner Water. Better Living. In Ashmore.
Conditioned water is gentler to wash in, leaving skin and hair feeling softer—something Ashmore families notice fast.
Helps eliminate the spotting and buildup that fogs shower glass and rings fixtures in Ashmore.
Soap and detergent work more efficiently, so Ashmore households use less and rinse cleaner.
The Mr. Pure Water Whole-House Reverse-Ionization System treats your water at the main line—ideal for Ashmore homes—and it does it without salt, chemicals, filters, or a power supply. Hard water enters carrying calcium, magnesium, iron, and heavy metals. Inside the premium 304 stainless body, a turbulent flow chamber brings the water into full contact with a catalytic core that physically decomposes those minerals into microscopic particles and ions. A controlled electromagnetic field then exchanges their ionic charge and reverses their polarization, reorganizing the minerals with the water molecules so they can no longer crystallize or combine with acid radical ions—which is what produces the 86% scale inhibition effect. A polished flow chamber stabilizes the water before it exits, and it exits clean, soft, scale-free, and corrosion-resistant with its healthy minerals intact. The internal alloy keeps releasing free electrons for up to ten years with no disassembly and no routine maintenance, at a 17.6 GPM flow rate, with no wastewater and nothing discharged to a drain.
Limited-Time Offer
$895
Installed
Regularly