It’s not just filtration, it’s transformation—whole-home scale protection for Beverley Beach, without salt tanks, chemicals, or cartridges to replace.
Advanced Technology Inside
Proprietary reverse-ionization technology physically decomposes hard water minerals down to a molecular level while exchanging their ionic charge, using a controlled electromagnetic field to restructure water into a balanced, healthier state—without salt, chemicals, or filters. Great for coastal Flagler County homes where salt air and humidity can be tough on plumbing and fixtures.
Creates a controlled turbulence zone for maximum contact and efficiency.
Breaks down hardness physically through catalytic media decomposition, without chemicals.
Creates ionization and enhances the transfer and efficiency of all ions.
Stabilizes and conditions the water before it exits the system.
Technical Specifications
Premium 304 stainless steel, no external power supply, no chemicals, and no wastewater. Built for coastal humidity and salt air in Beverley Beach, the internal alloy keeps releasing electrons for up to ten years with no disassembly and no routine maintenance in that time.
86%
Scale inhibition rate
17.6 GPM
Flow rate
10 yr
Alloy service life
0 W
External power needed
Fits most standard pipes, plumbed in where the water enters your Beverley Beach home.
Treats water mains up to three kilometres in length.
The recommended water hardness range for your Beverley Beach home’s system.
Stainless steel built for coastal humidity and salt air in Beverley Beach.
No outlet, no controller, nothing to reset after an outage in Beverley Beach.
Nothing is discharged to a drain, and healthy minerals stay in the water—great for Beverley Beach homes on city water or wells.
Limited-Time Offer
$895
Installed
Regularly

Stainless conditioning unit, fittings, mounting hardware & all parts.

Plumbed into your main line and commissioned by our Flagler County pros.

We test your water—municipal or well—so you know what you’re starting from in Beverley Beach.

No surprises—one low price includes everything for your Beverley Beach home.

No salt to buy, no filters to replace, and no electricity to run—great for Flagler County homes.

Treated at the source for the whole home—right here in Beverley Beach.
How It Works
Hard water enters the system carrying calcium, magnesium, and other minerals—and leaves clean, soft, scale-free, and more corrosion-resistant for coastal Beverley Beach conditions.
Decomposition and charge exchange, not ion swapping
The alloy inside the device changes the structure of the metal ions passing through it, leaving calcium and magnesium ions unable to crystallize. Preventing those ions from combining with acid radical ions is what produces the scale inhibition effect. An internal diversion device pressurizes the water flow and brings it into full contact with the alloy, so the alloy releases free electrons efficiently.
Hard water enters the system carrying calcium, magnesium, and other minerals—from municipal lines or private wells around Beverley Beach.
A catalytic core physically decomposes minerals, breaking them down into microscopic particles and ions.
Ionic charge is exchanged and minerals are reorganized with water molecules at the microscopic level.
Water exits clean, soft, scale-free and more corrosion-resistant.
It works on the scale you already have
The system prevents and reduces new scale, and it also softens and removes scale that’s already built up inside your plumbing—helpful for coastal-area fixtures and lines.
Mineral Decomposition & Ion Exchange
The minerals aren’t stripped out and swapped for sodium. They’re decomposed, recharged, and reorganized—so your water leaves balanced rather than stripped, ideal for coastal Florida living.
Why It’s Different
Most water softeners need a brine tank, a drain line, and a power supply—and most filters need replacing. This system needs none of it, which keeps running costs low for Beverley Beach homes.
| What it takes to run | Conventional Softener | Reverse Ionization This System |
|---|---|---|
| Salt | Bags of brine to buy, carry and refill | No salt, no backwash, no mess |
| Chemicals | Additives and by-products to manage | No additives and no by-products |
| Electricity | An outlet and a controller to reset | Works 24/7 automatically, unpowered |
| Filters | Cartridges on a replacement schedule | Nothing to replace |
| Upkeep | Regeneration cycles and routine service | High performance with no routine upkeep |
| Running cost | Salt, power and consumables every year | Lower utility and repair costs |
| Build | Tanks, valves and moving parts | Premium 304 stainless steel |
Swipe the table sideways to compare both columns.
Installed for $895 - regularly $1,500.
One stainless unit, plumbed in at the main line, conditioning every tap in the house with an 86% scale inhibition rate and a 17.6 GPM flow rate. It suits city water or private wells around Flagler County (Palm Coast area) in homes with hardness below 300 ppm. If you’re not sure how hard your water is, we’ll test it as part of the visit.
Key Benefits
Scale quietly costs you money—pressure, appliance life, and repair bills. Here in coastal Flagler County, stopping buildup can make a real difference.
Results vary with source water and household usage. We test your water on the visit—whether you’re on municipal water or a private well in the Beverley Beach area.
Ideal For
It installs on the main line, so everything downstream is treated—your plumbing, the appliances that heat and hold water, and even outdoor irrigation (a big help in our humid, coastal Flagler County climate).
Cleaner Water. Better Living. In Beverley Beach.
Installed by a Florida plumbing company that’s trusted in the Palm Coast area—and stands behind the work.
A premium 304 stainless body—built for humid, salt-air coastal Florida—with an internal alloy rated for up to ten years of service.
No salt, no power, no filters, and no regeneration cycle—very little to think about for busy Beverley Beach households.
We stand behind our products and the quality of our service in Beverley Beach.
Join homeowners across Flagler County who choose Mr. Pure Water.
Cleaner Water. Better Living. In Beverley Beach.
Conditioned water is gentler to wash in, leaving skin and hair feeling softer—not stripped in our humid coastal climate.
Helps eliminate the spotting and buildup that fogs shower glass and rings your fixtures in coastal Beverley Beach.
Soap and detergent work more efficiently, so you use less and rinse cleaner.
The Mr. Pure Water Whole-House Reverse-Ionization System treats your water at the main line, and it does it without salt, chemicals, filters or a power supply. In the Beverley Beach area, homes may be on municipal water or private wells depending on location—either way, hard water enters carrying calcium, magnesium, iron and heavy metals. Inside the premium 304 stainless body, a turbulent flow chamber brings the water into full contact with a catalytic core that physically decomposes those minerals into microscopic particles and ions. A controlled electromagnetic field then exchanges their ionic charge and reverses their polarization, reorganizing the minerals with the water molecules so they can no longer crystallize or combine with acid radical ions—which is what produces the 86% scale inhibition effect. A polished flow chamber stabilizes the water before it exits, and it exits clean, soft, scale-free and corrosion-resistant with its healthy minerals intact. The internal alloy keeps releasing free electrons for up to ten years with no disassembly and no routine maintenance, at a 17.6 GPM flow rate, with no wastewater and nothing discharged to a drain.
Limited-Time Offer
$895
Installed
Regularly