It’s not just filtration, it’s transformation—softer water and scale protection for your whole Brookside home, without salt tanks, chemicals, or cartridges to replace.
Advanced Technology Inside
Our proprietary reverse-ionization technology physically decomposes hard-water minerals down to a molecular level while exchanging their ionic charge, using a controlled electromagnetic field to restructure water into a balanced, healthier state—without salt, chemicals, or filters. It softens water and helps prevent Florida limescale without the salt tanks or pressure pumps most water softeners require.
Creates a controlled turbulence zone for maximum contact and efficiency.
Breaks down hardness physically through catalytic media decomposition, without chemicals—ideal for Florida hard water.
Creates ionization and enhances the transfer and efficiency of all ions.
Stabilizes and conditions the water before it exits the system.
Technical Specifications
Premium 304 stainless steel, no external power supply, no chemicals and no wastewater—great for Brookside’s humid subtropical climate and year-round water use. The internal alloy keeps releasing electrons for up to ten years with no disassembly and no routine maintenance in that time.
86%
Scale inhibition rate
17.6 GPM
Flow rate
10 yr
Alloy service life
0 W
No external power needed
Fits most standard pipes, plumbed in right where water enters your Brookside home.
Treats water mains up to three kilometres in length.
The recommended water hardness range for Brookside homes.
Stainless steel built to sit on your Brookside main line for the long haul.
No outlet, no controller, nothing to reset after an outage—handy during hurricane season.
Nothing is discharged to a drain, and healthy minerals stay in the water—ideal for Brookside households.
Limited-Time Offer
$895
Installed
Regularly

Stainless conditioning unit, fittings, mounting hardware & all parts.

Plumbed into your main line and commissioned by Brookside professionals.

We test your Brookside water so you know what you’re starting from.

No surprises—one low price includes everything for your Brookside home.

No salt to buy, no filters to replace, and no electricity to run—ideal for Brookside living.

Treated at the source, for the whole Brookside home.
How It Works
Brookside hard water can carry calcium, magnesium, and other minerals in—then leave clean, soft, scale-free, corrosion-resistant water flowing out to your home.
Decomposition and charge exchange—not simple ion swapping
The alloy inside the device changes the structure of the metal ions passing through it, leaving calcium and magnesium ions unable to crystallize—helpful in Florida areas where hard water and limescale are common. Preventing those ions from combining with acid radical ions is what produces the scale inhibition effect. An internal diversion device pressurizes the water flow and brings it into full contact with the alloy, so the alloy releases free electrons efficiently.
Brookside hard water enters the system carrying calcium, magnesium, and other minerals.
A catalytic core physically decomposes minerals, breaking them down into microscopic particles and ions—ideal for hard-water, limescale-prone Florida homes.
Ionic charge is exchanged and minerals are reorganized with water molecules at the microscopic level to help condition Brookside’s water.
Water exits clean, soft, scale-free and corrosion-resistant—ideal for Brookside homes.
It works on the limescale you already have—common in many Florida homes.
The system prevents and reduces new scale, and it also softens and removes scale that’s already built up inside your plumbing—helpful with Florida hard water.
Mineral Decomposition & Ion Exchange
The minerals aren’t stripped out and swapped for sodium. They’re decomposed, recharged, and reorganized—so Brookside water leaves balanced rather than stripped.
Why Brookside Homes Choose It
Most water softeners need a brine tank, a drain line, and a power supply—and most filters need replacing. This system needs none of it, which keeps running costs low for Brookside homeowners.
| What it takes to run | Conventional Softener | Reverse Ionization This System |
|---|---|---|
| Salt | No bags of brine to buy, haul, and refill | No salt, no backwash, no mess |
| Chemicals | Additives and by-products to manage | No additives and no by-products |
| Electricity | No outlet needed, and no controller to reset | Works 24/7 automatically, unpowered |
| Filters | Cartridges on a replacement schedule | Nothing to replace |
| Upkeep | Regeneration cycles and routine service | High performance with no routine upkeep |
| Running cost | Salt, power and consumables every year | Lower utility and repair costs |
| Build | Tanks, valves and moving parts | Premium 304 stainless steel |
Swipe the table sideways to compare both columns.
Installed for $895 - regularly $1,500.
One stainless unit, plumbed in at the main line, conditioning every tap in the house with a 86% scale inhibition rate and a 17.6 GPM flow rate. A smart fit for Brookside, where Florida’s hard water can leave limescale behind. It suits city or well water in homes with hardness below 300 ppm. If you’re not sure how hard your water is, we’ll test it as part of the visit.
Key Benefits
Scale quietly costs you money—lower pressure, shorter appliance life, and more repair bills. Here in Brookside, that changes when your water stops depositing it.
Results vary with source water and household usage. We test your water on the visit, so you know what you’re starting from in Brookside.
Ideal For
Installed on the main line, it treats everything downstream—your plumbing, water-using appliances, and outdoor irrigation—helping protect against Florida-scale buildup.
Cleaner Water. Better Living in Brookside.
Installed by a Florida plumbing company that’s been doing this a long time—and stands behind the work for Brookside homeowners.
A premium 304 stainless body with an internal alloy rated for up to ten years of service.
No salt, no power, no filters, and no regeneration cycle—simple for busy Brookside households.
In Brookside, we stand behind our products and the quality of our service.
Join Brookside homeowners across Florida who choose Mr. Pure Water.
Cleaner Water. Better Living. In Brookside.
Conditioned water is gentler to wash in, leaving skin and hair feeling softer—especially helpful with Florida hard water.
Helps eliminate the spotting and buildup that fogs shower glass and rings your fixtures—common with Florida limescale.
Soap and detergent work better in Brookside’s hard-water conditions—use less and rinse cleaner.
The Mr. Pure Water Whole-House Reverse-Ionization System treats your water at the main line, and it does it without salt, chemicals, filters or a power supply. That’s a big deal for Brookside homes, where Florida’s hard water and limescale can be a constant battle—and hurricane season can sometimes impact water quality and availability. Hard water enters carrying calcium, magnesium, iron and heavy metals. Inside the premium 304 stainless body, a turbulent flow chamber brings the water into full contact with a catalytic core that physically decomposes those minerals into microscopic particles and ions. A controlled electromagnetic field then exchanges their ionic charge and reverses their polarization, reorganizing the minerals with the water molecules so they can no longer crystallize or combine with acid radical ions—which is what produces the 86% scale inhibition effect. A polished flow chamber stabilizes the water before it exits, and it exits clean, soft, scale-free and corrosion-resistant with its healthy minerals intact. The internal alloy keeps releasing free electrons for up to ten years with no disassembly and no routine maintenance, at a 17.6 GPM flow rate, with no wastewater and nothing discharged to a drain.
Limited-Time Offer
$895
Installed
Regularly