It’s not just filtration, it’s transformation—softer water and scale protection for your Cameron City home, without salt tanks, chemicals, or cartridges to replace.
Advanced Technology Inside
Our proprietary reverse-ionization technology physically decomposes hard water minerals to a molecular level while exchanging ionic charge, using a controlled electromagnetic field to restructure water—without salt, chemicals, or filters. Because Florida water quality can vary by utility and source, we help confirm what’s best for your Cameron City address.
Creates a controlled turbulence zone for maximum contact and efficiency—ideal for Cameron City water conditions.
Breaks down hardness physically through catalytic media decomposition, without chemicals—helpful where Florida water conditions vary by source.
Creates ionization and enhances the transfer and efficiency of ions.
Stabilizes and conditions the water before it exits the system.
Technical Specifications
Premium 304 stainless steel, no external power supply, no chemicals and no wastewater—great for Cameron City’s humid subtropical climate where dependable, low-maintenance systems matter. The internal alloy keeps releasing electrons for up to ten years with no disassembly and no routine maintenance in that time.
86%
Scale inhibition rate
17.6 GPM
Flow rate
10 yr
Alloy service life
0 W
External power needed
Fits most standard pipes, plumbed in where water enters your Cameron City home.
Treats water mains up to three kilometres in length.
Recommended hardness range depends on your Cameron City water source—test first.
A stainless steel body built to sit on your main line for the long haul in humid Florida.
No outlet, no controller, nothing to reset after an outage in Cameron City.
Nothing is discharged to a drain, and healthy minerals stay in the water—ideal for Cameron City households.
Limited-Time Offer
$895
Installed
Regularly

Stainless conditioning unit, fittings, mounting hardware & all parts.

Plumbed into your main line and commissioned by Cameron City pros.

We test your Cameron City water so you know what you’re starting from.

No surprises—one low price for Cameron City homeowners includes everything.

No salt to buy, no filters to replace, and no electricity to run—ideal for Cameron City homes.

Treated at the source, for the whole Cameron City home.
How It Works
Hard water can be an issue across Florida depending on your utility and source. Our system helps water enter with calcium and magnesium and leave clean, soft, scale-free, and more corrosion-resistant for your Cameron City home.
Decomposition and charge exchange, not traditional ion swapping
The alloy inside the device changes the structure of the metal ions passing through it, leaving calcium and magnesium ions unable to crystallize. Preventing those ions from combining with acid radical ions is what produces the scale inhibition effect. An internal diversion device pressurizes the water flow and brings it into full contact with the alloy, so the alloy releases free electrons efficiently.
Hard water may vary by water source here in Florida, carrying calcium, magnesium, and other minerals.
A catalytic core physically decomposes minerals, breaking them down into microscopic particles and ions.
Ionic charge is exchanged and minerals are reorganized with water molecules at the microscopic level.
Water exits clean, soft, scale-free and corrosion-resistant—ideal for Cameron City households.
It works on the scale you may already have in your Cameron City plumbing
The system prevents and reduces the formation of new scale, and it also softens and removes scale that has already built up inside your plumbing—helpful for Cameron City homes where water hardness can vary by source.
Mineral Decomposition & Ion Exchange
The minerals are not stripped out and swapped for sodium. They are decomposed, recharged and reorganized—so your Cameron City water leaves balanced rather than stripped.
Why It’s Different for Cameron City Homes
Most water softeners need a brine tank, a drain line, and a power supply—and most filters need replacing. This system needs none of it, a big plus for Cameron City homeowners.
| What it takes to run | Conventional Softener | Reverse Ionization This System |
|---|---|---|
| Salt | Bags of brine to buy, carry, and refill | No salt, no backwash, no mess |
| Chemicals | Additives and by-products to manage | No additives and no by-products |
| Electricity | An outlet and a controller to reset | Works 24/7 automatically, unpowered |
| Filters | Cartridges on a replacement schedule | Nothing to replace |
| Upkeep | Regeneration cycles and routine service | High performance with no routine upkeep |
| Running cost | Salt, power and consumables every year | Lower utility and repair costs |
| Build | Tanks, valves and moving parts | Premium 304 stainless steel |
Swipe the table sideways to compare both columns.
Installed for $895 - regularly $1,500.
One stainless unit, plumbed in at the main line, conditioning every tap in the house with a 86% scale inhibition rate and a 17.6 GPM flow rate. It suits city or well water in homes with hardness below 300 ppm. Since water quality can vary by utility and source across Florida, we’ll test your water during the Cameron City visit so you know exactly what you’re working with.
Key Benefits
Scale quietly costs you money—lower pressure, shorter appliance life, more repairs. When your Cameron City water stops depositing it, everything changes.
Results vary with source water and household usage. Because water quality and hardness can vary by utility and source across Florida, we test your water on the Cameron City visit so you know what you’re starting from.
Ideal For
Installed on your main line, it treats everything downstream—your plumbing, water-using appliances, and even outdoor irrigation—ideal for Cameron City living in Florida’s humid subtropical climate.
Cleaner Water. Better Living in Cameron City.
Installed by a Florida plumbing company that knows local water conditions—and stands behind the work.
A premium 304 stainless body with an internal alloy rated for up to ten years of service.
No salt, no power, no filters, and no regeneration cycle—easy ownership for busy Cameron City households.
We stand behind our products and the quality of our Cameron City service.
Join Cameron City homeowners who choose Mr. Pure Water for better water at every tap.
Cleaner Water. Better Living. In Cameron City.
Conditioned water is gentler to wash in, so skin and hair are left feeling softer rather than stripped—great for Cameron City’s humid subtropical climate.
Helps eliminate the spotting and buildup that fogs shower glass and rings your fixtures in Cameron City.
Soap and detergent work more efficiently, so you use less of both and rinse cleaner—great for Cameron City homes.
The Mr. Pure Water Whole-House Reverse-Ionization System treats your water at the main line, and it does it without salt, chemicals, filters or a power supply. Because water quality and hardness can vary by utility and source across Florida, we confirm the serving water system for your Cameron City address to assess hardness/scale risk and any treatment needs. Hard water enters carrying calcium, magnesium, iron and heavy metals. Inside the premium 304 stainless body, a turbulent flow chamber brings the water into full contact with a catalytic core that physically decomposes those minerals into microscopic particles and ions. A controlled electromagnetic field then exchanges their ionic charge and reverses their polarization, reorganizing the minerals with the water molecules so they can no longer crystallize or combine with acid radical ions - which is what produces the 86% scale inhibition effect. A polished flow chamber stabilizes the water before it exits, and it exits clean, soft, scale-free and corrosion-resistant with its healthy minerals intact. The internal alloy keeps releasing free electrons for up to ten years with no disassembly and no routine maintenance, at a 17.6 GPM flow rate, with no wastewater and nothing discharged to a drain.
Limited-Time Offer
$895
Installed
Regularly