Phone: 321-400-9302
info@bestwaterheater.com
Phone: 321-400-9302
info@bestwaterheater.com
Phone: 321-400-9302
info@bestwaterheater.com
It’s not just filtration—it’s transformation. Whole-home scale protection for City Point’s hard water, without salt tanks, chemicals, or cartridges to replace.
Advanced Technology Inside
Our proprietary reverse-ionization technology physically decomposes hard-water minerals down to a molecular level while exchanging their ionic charge, using a controlled electromagnetic field to restructure water into a balanced, healthier state—without salt, chemicals, or filters. It helps City Point homes soften water and prevent scale without the salt tanks or pressure pumps most softeners require.
Creates a controlled turbulence zone for maximum contact and efficiency—great for City Point’s hard water.
Breaks down hardness physically through catalytic media decomposition, without chemicals—ideal for hard water in City Point.
Creates ionization and enhances the transfer and efficiency of all ions.
Stabilizes and conditions City Point water before it exits the system.
Technical Specifications
Premium 304 stainless steel, no external power supply, no chemicals, and no wastewater—ideal for City Point living. The internal alloy keeps releasing electrons for up to ten years with no disassembly and no routine maintenance in that time.
86%
Scale inhibition rate
17.6 GPM
Flow rate
10 yr
Alloy service life
0 W
No external power needed
Fits most standard pipes, plumbed in right where the water enters your City Point home.
Treats water mains up to three kilometres in length.
Recommended hardness range for homes dealing with City Point’s hard water.
A stainless steel body built for City Point’s hard-water conditions.
No outlet, no controller, nothing to reset after an outage in City Point.
Nothing is discharged to a drain, and healthy minerals stay in the water—great for City Point households.
Limited-Time Offer
$895
Installed
Regularly
Stainless conditioning unit, fittings, mounting hardware & all parts for your City Point home.
Plumbed into your main line and commissioned by pros here in City Point.
We test your City Point water so you know exactly what you’re starting from.
No surprises for City Point homeowners. One low price includes everything.
No salt to buy, no filters to replace, and no electricity to run—ideal for City Point.
Treated at the source, for the whole City Point home.
How It Works
City Point hard water can carry calcium, magnesium, and other minerals in—then leave clean, soft, scale-free, corrosion-resistant water flowing out.
Decomposition and charge exchange—not ion swapping
The alloy inside the device changes the structure of the metal ions passing through it, leaving calcium and magnesium ions unable to crystallize—key for City Point’s hard water. Preventing those ions from combining with acid radical ions is what produces the scale inhibition effect. An internal diversion device pressurizes the water flow and brings it into full contact with the alloy, so the alloy releases free electrons efficiently.
City Point’s hard water enters the system carrying calcium, magnesium, and other minerals.
A catalytic core physically decomposes minerals—helping break down City Point hard-water scale into microscopic particles and ions.
Ionic charge is exchanged and minerals are reorganized with water molecules at the microscopic level—ideal for mineral-rich water in coastal Florida.
Water exits clean and scale-free—ideal for hard water common around City Point.
It works on the hard-water scale you already have
The system prevents and reduces new scale and can also help break down existing scale inside plumbing—especially helpful with City Point’s hard water.
Mineral Decomposition & Ion Exchange
The minerals aren’t stripped out and swapped for sodium. They’re decomposed, recharged, and reorganized—so City Point water leaves balanced rather than stripped.
Why It’s Different in City Point
Most water softeners need a brine tank, a drain line and a power supply, and most filters need replacing. This system needs none of it—helpful for City Point homeowners who want lower upkeep with hard water.
| What it takes to run | Conventional Softener | Reverse Ionization This System |
|---|---|---|
| Salt | Brine bags to buy, carry, and refill | No salt, no backwash, no mess—just cleaner water for City Point. |
| Chemicals | Additives and by-products to manage | No additives and no by-products |
| Electricity | An outlet and a controller to reset | Works 24/7 automatically, unpowered—great for City Point homes |
| Filters | Cartridges on a replacement schedule | Nothing to replace |
| Upkeep | Regeneration cycles and routine service | High performance with no routine upkeep |
| Running cost | Salt, power and consumables every year | Lower utility and repair costs in City Point homes |
| Build | Tanks, valves and moving parts | Premium 304 stainless steel |
Swipe the table sideways to compare both columns.
Installed for $895 in City Point - regularly $1,500.
One stainless unit, plumbed in at the main line, conditioning every tap in the house with a 86% scale inhibition rate and a 17.6 GPM flow rate. Great for City Point homes where hard, mineral-rich water can leave scale behind. It suits city or well water in homes with hardness below 300 ppm. If you’re not sure how hard your water is, we’ll test it as part of the visit.
Key Benefits
In coastal Florida areas like City Point, scale can quietly cost you money—in pressure, appliance life, and repair bills. Here’s what changes once water stops depositing it.
Results vary with source water and household usage. In City Point, we test your water on the visit so you know what you’re starting from.
Ideal For
Installed on your main line, it treats everything downstream—your plumbing, water-using appliances, and even outdoor irrigation—helping fight City Point’s hard-water scale.
Cleaner Water. Better Living. In City Point.
Installed by a Florida plumbing company that knows hard-water issues in places like City Point—and stands behind the work.
A premium 304 stainless body with an internal alloy rated for up to ten years of service—ideal for City Point’s hard water.
No salt, no power, no filters, and no regeneration cycle—easy, low-hassle scale protection for City Point homes.
We stand behind our products and the quality of service we provide in City Point.
Join City Point homeowners who choose Mr. Pure Water for better water at every tap.
Cleaner Water. Better Living. In City Point.
Conditioned water is gentler to wash in—especially helpful with City Point’s hard water—so skin and hair feel softer, not stripped.
Helps eliminate the spotting and buildup that fogs shower glass and rings fixtures in City Point homes.
Soap and detergent work better with City Point hard water, so you use less and rinse cleaner.
The Mr. Pure Water Whole-House Reverse-Ionization System treats your water at the main line, and it does it without salt, chemicals, filters or a power supply—great for City Point homes dealing with hard, mineral-rich water. Hard water enters carrying calcium, magnesium, iron and heavy metals. Inside the premium 304 stainless body, a turbulent flow chamber brings the water into full contact with a catalytic core that physically decomposes those minerals into microscopic particles and ions. A controlled electromagnetic field then exchanges their ionic charge and reverses their polarization, reorganizing the minerals with the water molecules so they can no longer crystallize or combine with acid radical ions - which is what produces the 86% scale inhibition effect. A polished flow chamber stabilizes the water before it exits, and it exits clean, soft, scale-free and corrosion-resistant with its healthy minerals intact. The internal alloy keeps releasing free electrons for up to ten years with no disassembly and no routine maintenance, at a 17.6 GPM flow rate, with no wastewater and nothing discharged to a drain.
Helps stop new scale and break down existing deposits—great for City Point’s hard water.
Clearing City Point scale out of your pipes helps keep water moving the way it should.
Helps eliminate City Point’s hard-water spotting on dishes, glassware, and fixtures.
Helps keep City Point hard-water scale off heaters, dishwashers, and washers.
Detergent lathers and rinses better, so you use less of it every wash—even with hard water.
No salt, no filters, and no service calls—built for long-term use in City Point homes.
Limited-Time Offer
$895
Installed
Regularly
321-400-9302
info@bestwaterheater.com
