It’s not just filtration, it’s transformation—whole-home scale protection for Cocoa and Brevard County, without salt tanks, chemicals, or cartridges to replace.
Advanced Technology Inside
Proprietary reverse-ionization technology physically decomposes hard water minerals down to a molecular level while exchanging their ionic charge, using a controlled electromagnetic field to restructure water into a balanced, healthier state—without salt, chemicals, or filters. It softens Cocoa’s mineral-rich water and helps prevent scale without the salt tanks or pressure pumps most water softeners require.
Creates a controlled turbulence zone for maximum contact and efficiency.
Breaks down hardness physically through catalytic media decomposition—no chemicals, just cleaner water for Cocoa homes.
Creates ionization and enhances the transfer and efficiency of all ions.
Stabilizes and conditions the water before it exits the system.
Technical Specifications
Premium 304 stainless steel, no external power supply, no chemicals, and no wastewater. The internal alloy keeps releasing electrons for up to ten years with no disassembly and no routine maintenance in that time.
86%
Scale inhibition rate
17.6 GPM
Flow rate
10 yr
Alloy service life
0 W
External power needed
Fits most standard pipes, plumbed in right where water enters your Cocoa home.
Treats water mains up to three kilometres in length.
Recommended hardness range for mineral-rich Cocoa water.
A stainless steel body built to handle Brevard County hard water for the long haul.
No outlet, no controller, nothing to reset after an outage—simple for Cocoa homes.
Nothing is discharged to a drain, and healthy minerals stay in the water—great for Brevard County households.
Limited-Time Offer
$895
Installed
Regularly

Stainless conditioning unit, fittings, mounting hardware & all parts.

Plumbed into your main line and commissioned by our Cocoa-area pros.

We test your Cocoa water so you know what you’re starting from.

No surprises—one low price includes everything for your Cocoa home.

No salt to buy, no filters to replace, and no electricity to run—great for Cocoa’s hard water.

Treated at the source, for the whole Cocoa home.
How It Works
Here in Cocoa, hard water often brings calcium, magnesium, and other minerals in—then leaves conditioned: soft-feeling, scale-free, and more corrosion-resistant.
Decomposition and charge exchange—not ion swapping
The alloy inside the device changes the structure of the metal ions passing through it, leaving calcium and magnesium ions unable to crystallize—key for hard water common in Cocoa and across the Space Coast. Preventing those ions from combining with acid radical ions is what produces the scale inhibition effect. An internal diversion device pressurizes the water flow and brings it into full contact with the alloy, so the alloy releases free electrons efficiently.
In Brevard County, hard water often enters carrying calcium, magnesium, and other minerals.
A catalytic core physically decomposes minerals, breaking them down into microscopic particles and ions—ideal for Cocoa’s hard water conditions.
Ionic charge is exchanged and minerals are reorganized with water molecules at the microscopic level.
Water exits clean, conditioned, scale-free and corrosion-resistant—great for Cocoa homes.
It works on the scale you already have
The system helps prevent and reduce new limescale, and it also helps break down existing scale already built up inside your plumbing—ideal for Cocoa’s hard water.
Mineral Decomposition & Ion Exchange
The minerals aren’t stripped out and swapped for sodium. They’re decomposed, recharged, and reorganized—so Cocoa homes get balanced water rather than stripped water.
Why It’s Different
Most softeners need a brine tank, drain line, and power—and most filters need replacing. For Cocoa’s hard water, this system needs none of it, which is where the running cost goes.
| What it takes to run | Conventional Softener | Reverse Ionization This System |
|---|---|---|
| Salt | Bags of brine to buy, carry, and refill | No salt, no backwash, no mess |
| Chemicals | Additives and by-products to manage | No additives and no by-products |
| Electricity | An outlet and a controller to reset | Works 24/7 automatically, unpowered |
| Filters | Cartridges on a set replacement schedule | Nothing to replace |
| Upkeep | Regeneration cycles and routine service | High performance with no routine upkeep |
| Running cost | Salt, power and consumables every year | Lower utility and repair costs |
| Build | Tanks, valves and moving parts | Premium 304 stainless steel |
Swipe the table sideways to compare both columns.
Installed for $895 - regularly $1,500.
One stainless unit, plumbed in at the main line, conditioning every tap in the house with an 86% scale inhibition rate and a 17.6 GPM flow rate. It suits Cocoa-area city or well water in homes with hardness below 300 ppm. If you’re not sure how hard your water is, we’ll test it as part of the visit.
Key Benefits
Hard, mineral-rich water around Cocoa can quietly cost you—pressure, appliance life, and repair bills. Here’s what changes once water stops depositing scale.
Results vary with source water and household usage. We test your water during the Cocoa-area visit so you know what you’re starting from.
Ideal For
Installed on your main line, it treats everything downstream—your plumbing, the appliances that heat and hold water, and even outdoor irrigation around your Cocoa property.
Cleaner Water. Better Living in Cocoa.
Installed by a Florida plumbing company trusted across Brevard County—and we stand behind the work.
A premium 304 stainless body with an internal alloy rated for up to ten years of service.
No salt, no power, no filters, and no regeneration cycle—very little to think about for busy Cocoa households.
We stand behind our products and the quality of service for Cocoa homeowners.
Join homeowners across Cocoa and Brevard County who choose Mr. Pure Water.
Cleaner Water. Better Living. In Cocoa.
Conditioned water is gentler to wash in—helpful for Cocoa’s mineral-rich water—so skin and hair feel softer, not stripped.
Helps eliminate the spotting and buildup that fogs shower glass and rings fixtures in many Cocoa homes with hard water.
Soap and detergent work better in Cocoa’s mineral-rich water—use less and rinse cleaner.
The Mr. Pure Water Whole-House Reverse-Ionization System treats your water at the main line, and it does it without salt, chemicals, filters or a power supply—ideal for the mineral-rich (hard) municipal and well water common around Cocoa and Brevard County. Hard water enters carrying calcium, magnesium, iron and heavy metals. Inside the premium 304 stainless body, a turbulent flow chamber brings the water into full contact with a catalytic core that physically decomposes those minerals into microscopic particles and ions. A controlled electromagnetic field then exchanges their ionic charge and reverses their polarization, reorganizing the minerals with the water molecules so they can no longer crystallize or combine with acid radical ions—which is what produces the 86% scale inhibition effect. A polished flow chamber stabilizes the water before it exits, and it exits clean, soft, scale-free and corrosion-resistant with its healthy minerals intact. The internal alloy keeps releasing free electrons for up to ten years with no disassembly and no routine maintenance, at a 17.6 GPM flow rate, with no wastewater and nothing discharged to a drain.
Limited-Time Offer
$895
Installed
Regularly