It’s not just filtration, it’s transformation—softer water and scale protection for your whole Four Mile Village home, without salt tanks, chemicals, or cartridges to replace.
Advanced Technology Inside
Proprietary reverse-ionization technology physically decomposes hard water minerals down to a molecular level while exchanging their ionic charge, using a controlled electromagnetic field to restructure water into a balanced, healthier state—without salt, chemicals, or filters. It softens water and helps prevent scale in Four Mile Village homes without the salt tanks or pressure pumps most water softeners require.
Creates a controlled turbulence zone for maximum contact time and efficiency.
Breaks down hardness physically through catalytic media decomposition—no chemicals added.
Creates ionization and enhances the transfer and efficiency of all ions in your Four Mile Village water.
Stabilizes and conditions the water before it exits the system for your Four Mile Village home.
Technical Specifications
Premium 304 stainless steel, no external power supply, no chemicals, and no wastewater—great for Four Mile Village households. The internal alloy keeps releasing electrons for up to ten years with no disassembly and no routine maintenance in that time.
86%
Scale inhibition rate
17.6 GPM
Flow rate
10 yr
Alloy service life
0 W
No external power needed
Fits most standard pipes, plumbed in where the water enters your Four Mile Village home.
Treats water mains up to three kilometres in length.
The recommended water hardness range for your Four Mile Village home.
A stainless steel body built to sit on your main line for the long haul in Four Mile Village.
No outlet, no controller, nothing to reset after an outage—simple for Four Mile Village homes.
Nothing is discharged to a drain, and healthy minerals stay in the water in your home.
Limited-Time Offer
$895
Installed
Regularly

Stainless conditioning unit, fittings, mounting hardware, and all parts for your Four Mile Village install.

Plumbed into your main line and commissioned by pros serving Four Mile Village, FL.

We test your water in Four Mile Village so you know exactly what you’re starting from.

No surprises—one low price includes everything for your Four Mile Village install.

No salt to buy, no filters to replace, and no electricity to run—great for Four Mile Village homes.

Treated at the source, for the whole Four Mile Village home.
How It Works
Hard water enters carrying calcium, magnesium, and other minerals, and leaves clean, soft, scale-free, and corrosion-resistant for your Four Mile Village home.
Decomposition and charge exchange—not ion swapping
The alloy inside the device changes the structure of the metal ions passing through it, leaving calcium and magnesium ions unable to crystallize. Preventing those ions from combining with acid radical ions is what produces the scale inhibition effect. An internal diversion device pressurizes the water flow and brings it into full contact with the alloy, so the alloy releases free electrons efficiently—right at the point your Four Mile Village water enters the home.
In Four Mile Village, hard water can carry calcium, magnesium, and other minerals into your plumbing.
A catalytic core physically decomposes minerals, breaking them down into microscopic particles and ions—helping reduce scale in Four Mile Village.
Ionic charge is exchanged and minerals are reorganized with water molecules at the microscopic level.
Water exits clean, soft, scale-free, and corrosion-resistant—ready for everyday life in Four Mile Village.
It works on the scale you already have in your Four Mile Village home
The system prevents and reduces new scale, and it also softens and removes scale that’s already built up inside your Four Mile Village plumbing.
Mineral Decomposition & Ion Exchange
The minerals aren’t stripped out and swapped for sodium. They’re decomposed, recharged, and reorganized—so Four Mile Village water leaves balanced rather than stripped.
Why It's Different
Most water softeners need a brine tank, a drain line, and a power supply—and most filters need replacing. This system needs none of it, which helps keep running costs low in Four Mile Village.
| What it takes to run in Four Mile Village | Conventional Softener | Reverse Ionization This System |
|---|---|---|
| Salt | Bags of brine to buy, carry, and refill | No salt, no backwash, no mess |
| Chemicals | Additives and by-products to manage | No additives and no by-products |
| Electricity | An outlet and a controller to reset | Works 24/7 automatically, unpowered |
| Filters | No cartridges to replace on a schedule in Four Mile Village | Nothing to replace |
| Upkeep | Regeneration cycles and routine service | High performance with no routine upkeep |
| Running cost | Salt, power and consumables every year | Lower utility and repair costs |
| Build | Tanks, valves and moving parts | Premium 304 stainless steel |
Swipe the table sideways to compare both columns.
Installed for $895 - regularly $1,500.
One stainless unit, plumbed in at the main line, conditioning every tap in your Four Mile Village home with an 86% scale inhibition rate and a 17.6 GPM flow rate. It suits city or well water in homes with hardness below 300 ppm. If you’re not sure how hard your water is, we’ll test it as part of the visit.
Key Benefits
Scale quietly costs you money—water pressure, appliance life, and repair bills. Here’s what changes in Four Mile Village once your water stops depositing it.
Results vary with source water and household usage. We test your water in Four Mile Village on the visit, so you know what you’re starting from.
Ideal For
Installed on the main line, it treats everything downstream—your plumbing, water-using appliances, and outdoor irrigation around your Four Mile Village home.
Cleaner Water. Better Living in Four Mile Village.
Installed by a Florida plumbing company that’s been doing this a long time—and stands behind the work for Four Mile Village homeowners.
A premium 304 stainless body with an internal alloy rated for up to ten years of service.
No salt, no power, no filters, and no regeneration cycle—easy for Four Mile Village homeowners.
We stand behind our products and the quality of service we provide in Four Mile Village.
Join homeowners across Florida—including right here in Four Mile Village—who choose Mr. Pure Water.
Cleaner Water. Better Living. In Four Mile Village.
Conditioned water is gentler to wash in, leaving skin and hair feeling softer—an easy upgrade for Four Mile Village families.
Helps eliminate the spotting and buildup that fogs shower glass and rings fixtures in Four Mile Village.
Soap and detergent work more efficiently, so you use less and rinse cleaner—great for busy Four Mile Village households.
The Mr. Pure Water Whole-House Reverse-Ionization System treats your water at the main line—ideal for Four Mile Village homes—and it does it without salt, chemicals, filters, or a power supply. Hard water enters carrying calcium, magnesium, iron, and heavy metals. Inside the premium 304 stainless body, a turbulent flow chamber brings the water into full contact with a catalytic core that physically decomposes those minerals into microscopic particles and ions. A controlled electromagnetic field then exchanges their ionic charge and reverses their polarization, reorganizing the minerals with the water molecules so they can no longer crystallize or combine with acid radical ions—which is what produces the 86% scale inhibition effect. A polished flow chamber stabilizes the water before it exits, and it exits clean, soft, scale-free, and corrosion-resistant with its healthy minerals intact. The internal alloy keeps releasing free electrons for up to ten years with no disassembly and no routine maintenance, at a 17.6 GPM flow rate, with no wastewater and nothing discharged to a drain.
Limited-Time Offer
$895
Installed
Regularly