It’s not just filtration—it’s transformation. Whole-home softer-feeling water and scale protection for Glenwood Heights, without salt tanks, chemicals, or cartridges to replace.
Advanced Technology Inside
Our proprietary reverse-ionization technology physically decomposes hard-water minerals down to a molecular level while exchanging their ionic charge, using a controlled electromagnetic field to restructure water into a balanced state—without salt, chemicals, or filters. Because Glenwood Heights water quality can vary between well and municipal sources (and issues like hardness, sulfur, or iron), we recommend a recent water test before selecting treatment. It softens water and helps prevent scale without the salt tanks or pressure pumps most softeners require.
Creates a controlled turbulence zone for maximum contact and efficiency.
Breaks down hardness physically through catalytic media decomposition—no chemicals needed.
Creates ionization and enhances the transfer and efficiency of all ions.
Stabilizes and conditions the water before it exits the system.
Technical Specifications
Premium 304 stainless steel, no external power supply, no chemicals, and no wastewater. The internal alloy keeps releasing electrons for up to ten years—no disassembly and no routine maintenance during that time.
86%
Scale inhibition rate
17.6 GPM
Flow rate
10 yr
Alloy service life
0 W
External power needed
Fits most standard pipes, plumbed in where the water enters your Glenwood Heights home.
Treats water mains up to three kilometres in length.
Recommended hardness range—confirm your Glenwood Heights water with a recent test (gpg).
A stainless steel body built to sit on your Glenwood Heights main line for the long haul.
No outlet, no controller, nothing to reset after an outage.
Nothing is discharged to a drain, and healthy minerals stay in your Glenwood Heights water.
Limited-Time Offer
$895
Installed
Regularly

Stainless conditioning unit, fittings, mounting hardware & all parts.

Plumbed into your main line and commissioned by pros here in Glenwood Heights.

We test your Glenwood Heights water so you know exactly what you’re starting from.

No surprises—one low price includes everything for your Glenwood Heights home.

No salt to buy, no filters to replace, and no electricity to run.

Treated at the source, for your whole Glenwood Heights home.
How It Works
Hard water enters carrying calcium, magnesium, and other minerals, and leaves clean, soft, scale-free, and corrosion-resistant—ideal for Glenwood Heights homes, whether you’re on a well or municipal water.
Decomposition and charge exchange—not simple ion swapping
The alloy inside the device changes the structure of the metal ions passing through it, leaving calcium and magnesium ions unable to crystallize. Preventing those ions from combining with acid radical ions is what produces the scale inhibition effect. An internal diversion device pressurizes the water flow and brings it into full contact with the alloy, so the alloy releases free electrons efficiently.
Hard water enters carrying calcium, magnesium, and other minerals—levels can vary in Glenwood Heights by water source.
A catalytic core physically decomposes minerals, breaking them down into microscopic particles and ions.
Ionic charge is exchanged and minerals are reorganized with water molecules at the microscopic level.
Water exits clean, soft, scale-free and corrosion-resistant—ideal for Glenwood Heights homes.
It works on the scale you already have
Helps prevent and reduce new scale, and can also loosen existing scale that’s already built up inside your plumbing.
Mineral Decomposition & Ion Exchange
The minerals aren’t stripped out and swapped for sodium. They’re decomposed, recharged, and reorganized—so your Glenwood Heights water leaves balanced rather than stripped.
Why It’s Different for Glenwood Heights
Most water softeners need a brine tank, a drain line, and power—and most filters need replacing. This system needs none of it, which helps keep costs down for Glenwood Heights homes.
| What it takes to run | Conventional Softener | Reverse Ionization This System |
|---|---|---|
| Salt | Bags of brine to buy, carry, and refill | No salt, no backwash, no mess |
| Chemicals | Additives and by-products to manage | No additives and no by-products |
| Electricity | An outlet and a controller to reset | Works 24/7 automatically, unpowered |
| Filters | No cartridges to swap on a schedule | Nothing to replace |
| Upkeep | Regeneration cycles and routine service | High performance with no routine upkeep |
| Running cost | Salt, power and consumables every year | Lower utility and repair costs |
| Build | Tanks, valves, and moving parts | Premium 304 stainless steel |
Swipe the table sideways to compare both columns.
Installed for $895 - regularly $1,500.
One stainless unit, plumbed at the main line, conditioning every tap with an 86% scale inhibition rate and a 17.6 GPM flow rate. Works for municipal or well water in Glenwood Heights homes with hardness below 300 ppm. Not sure what you have? We’ll test your water during the visit.
Key Benefits
Scale quietly costs you money—pressure loss, shorter appliance life, and repair bills. Here’s what changes when your water stops leaving it behind.
Results vary by source water (well vs. municipal) and household use. We test your Glenwood Heights water on the visit so you know what you’re starting from.
Ideal For
It installs on the main line, so everything downstream is treated—your plumbing, the appliances that heat and hold water, and even outdoor irrigation. Great for Glenwood Heights properties on well or municipal supply.
Cleaner Water. Better Living. In Glenwood Heights.
Installed by a Florida plumbing company that knows local water conditions and stands behind the work.
A premium 304 stainless body with an internal alloy rated for up to ten years of service.
No salt, no power, no filters, and no regeneration cycle—very little to think about in your Glenwood Heights home.
In Glenwood Heights, we stand behind our products and the quality of our service.
Join Glenwood Heights homeowners who choose Mr. Pure Water.
Cleaner Water. Better Living. Glenwood Heights.
Conditioned water is gentler to wash in, leaving skin and hair feeling softer—great for Glenwood Heights showers.
Helps eliminate the spotting and buildup that fogs shower glass and rings your fixtures.
Soap and detergent work more efficiently, so you use less and rinse cleaner in Glenwood Heights.
The Mr. Pure Water Whole-House Reverse-Ionization System treats your water at the main line, and it does it without salt, chemicals, filters or a power supply. Since water quality can vary around Glenwood Heights (well vs. municipal), we recommend a recent water test to confirm hardness (gpg) and check for sulfur/iron before choosing treatment. Hard water enters carrying calcium, magnesium, iron and heavy metals. Inside the premium 304 stainless body, a turbulent flow chamber brings the water into full contact with a catalytic core that physically decomposes those minerals into microscopic particles and ions. A controlled electromagnetic field then exchanges their ionic charge and reverses their polarization, reorganizing the minerals with the water molecules so they can no longer crystallize or combine with acid radical ions - which is what produces the 86% scale inhibition effect. A polished flow chamber stabilizes the water before it exits, and it exits clean, soft, scale-free and corrosion-resistant with its healthy minerals intact. The internal alloy keeps releasing free electrons for up to ten years with no disassembly and no routine maintenance, at a 17.6 GPM flow rate, with no wastewater and nothing discharged to a drain.
Limited-Time Offer
$895
Installed
Regularly