It’s not just filtration—it’s transformation for Imperial Point. Softer-feeling water and scale protection for the whole house, without salt tanks, chemicals, or cartridges to replace.
Advanced Technology Inside
Our proprietary reverse-ionization technology physically decomposes hard-water minerals down to a molecular level while exchanging their ionic charge, using a controlled electromagnetic field to restructure water into a balanced, healthier state—without salt, chemicals, or filters. It softens and helps prevent scale for Imperial Point homes without the salt tanks or pressure pumps most softeners require.
Creates a controlled turbulence zone for maximum contact and efficiency.
Breaks down hardness physically through catalytic media decomposition—no chemicals needed.
Creates ionization and enhances the transfer and efficiency of all ions.
Stabilizes and conditions the water before it exits the system.
Technical Specifications
Premium 304 stainless steel, no external power supply, no chemicals and no wastewater—ideal for busy Fort Lauderdale–area households. The internal alloy keeps releasing electrons for up to ten years with no disassembly and no routine maintenance in that time.
86%
Scale inhibition rate
17.6 GPM
Flow rate
10 yr
Alloy service life
0 W
External power needed
Fits most standard pipes, plumbed in right where water enters your Imperial Point home.
Treats water mains up to three kilometres in length.
Ideal for Imperial Point’s moderate-hard municipal water range.
A stainless steel body built for coastal South Florida homes—made to last.
No outlet, no controller, nothing to reset after an outage in Imperial Point.
Nothing is discharged to a drain, and healthy minerals stay in your Broward County water.
Limited-Time Offer
$895
Installed
Regularly

Stainless conditioning unit, fittings, mounting hardware & all parts.

Plumbed into your main line and commissioned by our Broward County pros.

We test your Imperial Point water so you know what you’re starting from.

No surprises—one low price includes everything.

No salt to buy, no filters to replace, and no electricity to run.

Treated at the source, for your whole Imperial Point home.
How It Works
Imperial Point’s municipal water can carry calcium, magnesium, and other minerals—our system conditions it so it leaves clean, soft, scale-free, and more corrosion-resistant.
Decomposition and charge exchange—not ion swapping
The alloy inside the device changes the structure of the metal ions passing through it, leaving calcium and magnesium ions unable to crystallize—helpful with the moderate hardness common on municipal water in coastal South Florida. Preventing those ions from combining with acid radical ions is what produces the scale inhibition effect. An internal diversion device pressurizes the water flow and brings it into full contact with the alloy, so the alloy releases free electrons efficiently.
Imperial Point municipal water enters the system carrying calcium, magnesium, and other minerals.
A catalytic core physically decomposes minerals, breaking them down into microscopic particles and ions.
Ionic charge is exchanged, and minerals are reorganized with water molecules at the microscopic level.
Water exits clean, conditioned, scale-free and corrosion-resistant—ideal for Broward County.
It works on the scale you already have—common with Broward’s moderate hardness.
The system helps prevent and reduce new scale, and it can also soften and remove scale already built up inside plumbing—common with South Florida’s moderate hardness over time.
Mineral Decomposition & Ion Exchange
The minerals aren’t stripped out and swapped for sodium. They’re decomposed, recharged, and reorganized—so Imperial Point homes get balanced water, not “stripped” water.
Why It’s Different
Most softeners need a brine tank, a drain line, and power—and most filters need replacing. In hot, humid South Florida, simpler matters: this system needs none of it, which is where the running cost goes.
| What it takes to run | Conventional Softener | Reverse Ionization This System |
|---|---|---|
| Salt | Bags of brine to buy, carry, and refill | No salt, no backwash, no mess |
| Chemicals | Additives and by-products to manage | No additives and no by-products |
| Electricity | An outlet and a controller to reset | Works 24/7 automatically, unpowered |
| Filters | Cartridges on a replacement schedule | Nothing to replace |
| Upkeep | Regeneration cycles and routine service | High performance with no routine upkeep |
| Running cost | Salt, power and consumables every year | Lower utility and repair costs |
| Build | Tanks, valves and moving parts | Premium 304 stainless steel |
Swipe the table sideways to compare both columns.
Installed for $895 - regularly $1,500.
One stainless unit, plumbed in at the main line, conditioning every tap in your Imperial Point home with a 86% scale inhibition rate and a 17.6 GPM flow rate. It suits municipal water typical of coastal South Florida, or well water, in homes with hardness below 300 ppm. If you’re not sure how hard your water is, we’ll test it during the visit.
Key Benefits
In coastal Broward County, moderate hardness can still leave scale on fixtures and appliances—costing you in pressure, lifespan, and repairs. Here’s what changes when water stops depositing it.
Results vary with source water and household usage. We test your Imperial Point water during the visit so you know what you’re starting from.
Ideal For
Installed on your main line, it treats everything downstream—your plumbing, water-using appliances, and even outdoor irrigation—ideal for Broward County homes dealing with mineral scale over time.
Cleaner Water. Better Living. In Imperial Point.
Installed by a Florida plumbing company that knows Broward County homes—and stands behind the work.
A premium 304 stainless body with an internal alloy rated for up to ten years of service.
No salt, no power, no filters, and no regeneration cycle—very little to think about in your Imperial Point home.
We stand behind our products and the quality of our work in Imperial Point.
Join homeowners across Broward County and the Fort Lauderdale metro who choose Mr. Pure Water.
Cleaner Water. Better Living.
Conditioned water is gentler to wash in, helping skin and hair feel softer—great for Imperial Point’s daily showers.
Helps eliminate the spotting and buildup that fogs shower glass and rings fixtures in Imperial Point.
Soap and detergent work better with Imperial Point’s municipal water—use less, rinse cleaner.
The Mr. Pure Water Whole-House Reverse-Ionization System treats your water at the main line—ideal for the municipal water supplies common in coastal South Florida, including Imperial Point. It does it without salt, chemicals, filters, or a power supply. Moderately hard water can still carry calcium, magnesium, iron, and heavy metals, and over time that can leave mineral scale on fixtures and appliances. Inside the premium 304 stainless body, a turbulent flow chamber brings the water into full contact with a catalytic core that physically decomposes those minerals into microscopic particles and ions. A controlled electromagnetic field then exchanges their ionic charge and reverses their polarization, reorganizing the minerals with the water molecules so they can no longer crystallize or combine with acid radical ions—which is what produces the 86% scale inhibition effect. A polished flow chamber stabilizes the water before it exits, and it leaves clean, soft-feeling, scale-resistant, and corrosion-resistant with its healthy minerals intact. The internal alloy keeps releasing free electrons for up to ten years with no disassembly and no routine maintenance, at a 17.6 GPM flow rate, with no wastewater and nothing discharged to a drain.
Limited-Time Offer
$895
Installed
Regularly