It’s not just filtration—it’s transformation. Softer water and scale protection for your whole Indian Pass home, without salt tanks, chemicals, or cartridges to replace.
Advanced Technology Inside
Proprietary reverse-ionization technology physically decomposes hard water minerals down to a molecular level while exchanging their ionic charge, using a controlled electromagnetic field to restructure water into a balanced, healthier state—without salt, chemicals, or filters. It softens water and helps prevent scale without the salt tanks or pressure pumps most water softeners require—an easy fit for Indian Pass homes.
Creates a controlled turbulence zone for maximum contact time and efficiency.
Breaks down hardness physically through catalytic media decomposition—no chemicals added.
Creates ionization and enhances the transfer and efficiency of all ions.
Stabilizes and conditions the water before it exits the system.
Technical Specifications
Premium 304 stainless steel, no external power supply, no chemicals, and no wastewater—ideal for low-hassle water conditioning in Indian Pass. The internal alloy keeps releasing electrons for up to ten years with no disassembly and no routine maintenance in that time.
86%
Scale inhibition rate
17.6 GPM
Flow rate
10 yr
Alloy service life
0 W
No external power needed
Fits most standard pipes, plumbed in where the water enters your Indian Pass home.
Treats water mains up to three kilometres in length.
The recommended water hardness range for your Indian Pass system.
A stainless-steel body built to sit on your main line for the long haul in Indian Pass.
No outlet, no controller, nothing to reset after an outage in Indian Pass.
Nothing is discharged to a drain, and healthy minerals stay in the water.
Limited-Time Offer
$895
Installed
Regularly

Stainless conditioning unit, fittings, mounting hardware, and all parts.

Plumbed into your main line and commissioned by pros serving Indian Pass.

We test your water in Indian Pass so you know exactly what you’re starting from.

No surprises. One low price includes everything for Indian Pass.

No salt to buy, no filters to replace, and no electricity to run—simple for Indian Pass homes.

Treated at the source, for the whole Indian Pass home.
How It Works
Hard water enters carrying calcium, magnesium, and other minerals, and leaves clean, soft, scale-free, and corrosion-resistant for Indian Pass homes.
Decomposition and charge exchange, not ion swapping
The alloy inside the device changes the structure of the metal ions passing through it, leaving calcium and magnesium ions unable to crystallize. Preventing those ions from combining with acid radical ions is what produces the scale inhibition effect. An internal diversion device pressurizes the water flow and brings it into full contact with the alloy, so the alloy releases free electrons efficiently.
Hard water can enter Indian Pass homes carrying calcium, magnesium, and other minerals.
A catalytic core physically decomposes minerals, breaking them down into microscopic particles and ions.
Ionic charge is exchanged and minerals are reorganized with water molecules at the microscopic level.
Water exits clean, soft, scale-free, and corrosion-resistant—ready for your whole Indian Pass home.
It works on the scale you already have
The system prevents and reduces new scale, and it also softens and removes scale that’s already built up inside your Indian Pass plumbing.
Mineral Decomposition & Ion Exchange
The minerals are not stripped out and swapped for sodium. They’re decomposed, recharged, and reorganized—so the water in your Indian Pass home leaves balanced rather than stripped.
Why It's Different
Most water softeners need a brine tank, a drain line, and a power supply—and most filters need replacing. With this system, you skip all of that, which is where the running cost usually goes.
| What it takes to run | Conventional Softener | Reverse Ionization This System |
|---|---|---|
| Salt | Bags of brine to buy, carry, and refill | No salt, no backwash, no mess |
| Chemicals | Additives and by-products to manage | No additives and no by-products |
| Electricity | An outlet and a controller to reset | Works 24/7 automatically, unpowered |
| Filters | No cartridges to swap on a schedule | Nothing to replace |
| Upkeep | Regeneration cycles and routine service | High performance with no routine upkeep |
| Running cost | Salt, power and consumables every year | Lower utility and repair costs |
| Build | Tanks, valves and moving parts | Premium 304 stainless steel |
Swipe the table sideways to compare both columns.
Installed for $895 - regularly $1,500.
One stainless unit, plumbed in at the main line, conditioning every tap in your Indian Pass home with an 86% scale inhibition rate and a 17.6 GPM flow rate. It suits city or well water in homes with hardness below 300 ppm. If you’re not sure how hard your water is, we’ll test it as part of the visit.
Key Benefits
Scale is what quietly costs you money—in pressure, appliance life, and repair bills. Here in Indian Pass, stopping scale buildup changes everything.
Results vary with source water and household usage. We test your water in Indian Pass on the visit so you know what you’re starting from.
Ideal For
It installs on the main line, so everything downstream is treated—your plumbing, water-using appliances, and outdoor irrigation around your Indian Pass home.
Cleaner Water. Better Living in Indian Pass.
Installed by a Florida plumbing company that serves Indian Pass—and stands behind the work.
A premium 304 stainless body with an internal alloy rated for up to ten years of service.
No salt, no power, no filters, and no regeneration cycle—very little to think about in Indian Pass.
We stand behind our products and the quality of service in Indian Pass.
Join the homeowners across Florida who choose Mr. Pure Water in Indian Pass.
Cleaner Water. Better Living. In Indian Pass.
Conditioned water is gentler to wash in, so skin and hair feel softer—an easy upgrade for Indian Pass households.
Helps eliminate the spotting and buildup that fogs shower glass and rings your fixtures in Indian Pass.
Soap and detergent work more efficiently, so Indian Pass homeowners use less and rinse cleaner.
The Mr. Pure Water Whole-House Reverse-Ionization System treats your water at the main line, and it does it without salt, chemicals, filters or a power supply. Hard water enters Indian Pass homes carrying calcium, magnesium, iron and heavy metals. Inside the premium 304 stainless body, a turbulent flow chamber brings the water into full contact with a catalytic core that physically decomposes those minerals into microscopic particles and ions. A controlled electromagnetic field then exchanges their ionic charge and reverses their polarization, reorganizing the minerals with the water molecules so they can no longer crystallize or combine with acid radical ions - which is what produces the 86% scale inhibition effect. A polished flow chamber stabilizes the water before it exits, and it exits clean, soft, scale-free and corrosion-resistant with its healthy minerals intact. The internal alloy keeps releasing free electrons for up to ten years with no disassembly and no routine maintenance, at a 17.6 GPM flow rate, with no wastewater and nothing discharged to a drain.
Limited-Time Offer
$895
Installed
Regularly