Phone: 850-772-1365
info@bestwaterheater.com
Phone: 850-772-1365
info@bestwaterheater.com
Phone: 850-772-1365
info@bestwaterheater.com
It’s not just filtration—it’s transformation. Softer water and scale protection for your whole Medart home, without salt tanks, chemicals, or cartridges to replace.
Advanced Technology Inside
Proprietary reverse-ionization technology physically decomposes hard-water minerals down to a molecular level while exchanging their ionic charge, using a controlled electromagnetic field to restructure water into a balanced, healthier state—without salt, chemicals, or filters. It softens water and helps prevent scale without the salt tanks or pressure pumps most water softeners require.
Creates a controlled turbulence zone for maximum contact and efficiency in your Medart home.
Breaks down hardness physically through catalytic media decomposition—no chemicals needed.
Creates ionization and enhances the transfer and efficiency of all ions.
Stabilizes and conditions the water before it exits the system.
Technical Specifications
Premium 304 stainless steel, no external power supply, no chemicals, and no wastewater. The internal alloy keeps releasing electrons for up to ten years with no disassembly and no routine maintenance.
86%
Scale inhibition rate
17.6 GPM
Flow rate
10 yr
Alloy service life
0 W
No external power needed
Fits most standard pipes, plumbed in where the water enters your Medart home.
Treats water mains up to three kilometres in length.
The recommended water hardness range for your Medart system.
A stainless steel body built to sit on your main line for the long haul in Medart, Florida.
No outlet, no controller, nothing to reset after an outage—simple for Medart households.
Nothing is discharged to a drain, and healthy minerals stay in the water—great for Medart homes.
Limited-Time Offer
$895
Installed
Regularly
Stainless conditioning unit, fittings, mounting hardware, and all parts included.
Plumbed into your main line and commissioned by Medart-area professionals.
We test your water in Medart so you know exactly what you’re starting from.
No surprises for Medart homeowners. One low price includes everything.
No salt to buy, no filters to replace, and no electricity to run—simple for Medart homes.
Treated at the source, for your whole Medart home.
How It Works
Hard water enters the system carrying calcium, magnesium, and other minerals, and leaves clean, soft, scale-free, and corrosion-resistant for your Medart home.
Decomposition and charge exchange, not ion swapping
The alloy inside the device changes the structure of the metal ions passing through it, leaving calcium and magnesium ions unable to crystallize. Preventing those ions from combining with acid radical ions is what produces the scale inhibition effect. An internal diversion device pressurizes the water flow and brings it into full contact with the alloy, so the alloy releases free electrons efficiently.
Hard water can enter Medart homes carrying calcium, magnesium, and other minerals.
A catalytic core physically decomposes minerals, breaking them down into microscopic particles and ions.
Ionic charge is exchanged and minerals are reorganized with water molecules at the microscopic level.
Water exits clean, soft, scale-free, and corrosion-resistant—ready for everyday life in Medart.
It works on the scale you already have
The system helps prevent new scale and reduce existing buildup inside your plumbing—so your Medart home can run cleaner and more efficiently.
Mineral Decomposition & Ion Exchange
The minerals are not stripped out and swapped for sodium. They are decomposed, recharged, and reorganized—so the water leaves balanced rather than stripped.
Why It's Different
Most water softeners need a brine tank, a drain line, and a power supply—and most filters need replacing. This system needs none of it, which helps keep running costs low for Medart homeowners.
| What it takes to run | Conventional Softener | Reverse Ionization This System |
|---|---|---|
| Salt | Bags of brine to buy, carry, and refill | No salt, no backwash, no mess |
| Chemicals | Additives and by-products to manage | No additives and no by-products |
| Electricity | An outlet and a controller to reset | Works 24/7 automatically, unpowered |
| Filters | No cartridges to swap on a schedule in Medart | Nothing to replace |
| Upkeep | Regeneration cycles and routine service | High performance with no routine upkeep |
| Running cost | Salt, power and consumables every year | Lower utility and repair costs |
| Build | Tanks, valves and moving parts | Premium 304 stainless steel |
Swipe the table sideways to compare both columns.
Installed for $895 - regularly $1,500.
One stainless unit, plumbed in at the main line, conditioning every tap in your Medart home with an 86% scale inhibition rate and a 17.6 GPM flow rate. It suits city or well water in homes with hardness below 300 ppm. If you’re not sure how hard your water is, we’ll test it as part of the visit.
Key Benefits
Scale is what quietly costs you money—in pressure, in appliance life, and in repair bills. Here in Medart, stopping scale buildup changes everything.
Results vary with source water and household usage. We test your water during your Medart visit so you know what you’re starting from.
Ideal For
Installed on your main line, it treats everything downstream—your plumbing, the appliances that heat and hold water, and even the irrigation outside your Medart home.
Cleaner Water. Better Living. In Medart.
Installed by a Florida plumbing company that’s been doing this a long time—and stands behind the work in Medart.
A premium 304 stainless body with an internal alloy rated for up to ten years of service.
No salt, no power, no filters, and no regeneration cycle—easy for Medart homeowners.
We stand behind our products and the quality of service we provide in Medart.
Join homeowners across Medart, Florida who choose Mr. Pure Water.
Cleaner Water. Better Living. Medart, FL.
Conditioned water is gentler to wash in, so skin and hair feel softer—more comfortable for everyday showers in Medart.
Helps eliminate the spotting and buildup that fogs shower glass and rings fixtures in Medart bathrooms.
Soap and detergent work more efficiently, so you use less and rinse cleaner in your Medart home.
The Mr. Pure Water Whole-House Reverse-Ionization System treats your water at the main line, and it does it without salt, chemicals, filters or a power supply. Hard water enters carrying calcium, magnesium, iron and heavy metals. Inside the premium 304 stainless body, a turbulent flow chamber brings the water into full contact with a catalytic core that physically decomposes those minerals into microscopic particles and ions. A controlled electromagnetic field then exchanges their ionic charge and reverses their polarization, reorganizing the minerals with the water molecules so they can no longer crystallize or combine with acid radical ions - which is what produces the 86% scale inhibition effect. A polished flow chamber stabilizes the water before it exits, and it exits clean, soft, scale-free and corrosion-resistant with its healthy minerals intact. The internal alloy keeps releasing free electrons for up to ten years with no disassembly and no routine maintenance, at a 17.6 GPM flow rate, with no wastewater and nothing discharged to a drain.
Prevents new scale and helps break down the deposits already inside your Medart pipes.
Clearing scale out of your pipes helps keep water moving the way it should in your Medart home.
Helps eliminate hard-water spotting on dishes, glassware, and fixtures in Medart homes.
Keeps scale off heating elements in water heaters, dishwashers, and washers—great for Medart households.
Detergent lathers and rinses better, so you use less of it every wash in Medart.
No salt, no filters, and no service calls for up to ten years of operation.
Limited-Time Offer
$895
Installed
Regularly
850-772-1365
info@bestwaterheater.com
