Phone: 321-400-9302
info@bestwaterheater.com
Phone: 321-400-9302
info@bestwaterheater.com
Phone: 321-400-9302
info@bestwaterheater.com
It’s not just filtration, it’s transformation—softer water and scale protection for Melbourne homes without salt tanks, chemicals, or cartridges to replace.
Advanced Technology Inside
Our proprietary reverse-ionization technology physically decomposes hard water minerals down to a molecular level while exchanging their ionic charge, using a controlled electromagnetic field to restructure water into a balanced, healthier state—without salt, chemicals, or filters. Ideal for Melbourne’s moderate hardness and coastal conditions that can contribute to spotting and scale. It softens water and helps prevent buildup without the salt tanks or pressure pumps most water softeners require.
Creates a controlled turbulence zone for maximum contact and efficiency.
Breaks down hardness physically through catalytic media decomposition, without chemicals.
Creates ionization and enhances the transfer and efficiency of all ions.
Stabilizes and conditions the water before it exits the system—great for humid Space Coast homes.
Technical Specifications
Premium 304 stainless steel, no external power supply, no chemicals and no wastewater—ideal for Brevard County homes. The internal alloy keeps releasing electrons for up to ten years with no disassembly and no routine maintenance in that time.
86%
Scale inhibition rate
17.6 GPM
Flow rate
10 yr
Longer alloy service life in coastal air
0 W
No external power needed
Fits most standard pipes—plumbed in where the water enters your Melbourne home.
Treats water mains up to three kilometres in length.
Recommended hardness range—ideal for Brevard County’s moderate water.
Stainless steel built for Space Coast humidity and long-term use.
No outlet, no controller—nothing to reset after a Florida storm outage.
Nothing is discharged to a drain, and healthy minerals stay in the water—great for Space Coast homes.
Limited-Time Offer
$895
Installed
Regularly
Stainless conditioning unit, fittings, mounting hardware & all parts.
Plumbed into your main line and commissioned by Melbourne-area pros.
We test your water in Melbourne so you know exactly what you’re starting from.
No surprises—one low price includes everything for your Melbourne home.
No salt to buy, no filters to replace, and no electricity to run—simple for Space Coast living.
Treated at the source for the whole Melbourne home.
How It Works
Melbourne’s moderately hard water enters carrying calcium, magnesium, and other minerals—and leaves clean, conditioned, scale-free, and more corrosion-resistant in our salty coastal air.
Decomposition and charge exchange—not ion swapping
The alloy inside the device changes the structure of the metal ions passing through it, leaving calcium and magnesium ions unable to crystallize. Preventing those ions from combining with acid radical ions is what produces the scale inhibition effect—helpful with the moderate mineral content common around Brevard County. An internal diversion device pressurizes the water flow and brings it into full contact with the alloy, so the alloy releases free electrons efficiently.
Melbourne’s moderately hard water enters the system carrying calcium, magnesium, and other minerals.
A catalytic core physically decomposes minerals, breaking them down into microscopic particles and ions—helping reduce scale and spotting common in coastal humidity.
Ionic charge is exchanged and minerals are reorganized with water molecules at the microscopic level for cleaner, more conditioned water throughout your Space Coast home.
Water exits clean, conditioned, scale-free, and corrosion-resistant.
It works on the scale you already have—common with Melbourne’s moderate hardness.
The system prevents and reduces new scale, and it also helps break down scale already built up in your plumbing—common with Melbourne’s mineral content.
Mineral Decomposition & Ion Exchange
The minerals aren’t stripped out and swapped for sodium. They’re decomposed, recharged, and reorganized—so Melbourne homes get balanced water, not “stripped” water.
Why It’s Different in Melbourne
Most water softeners need a brine tank, a drain line, and a power supply—and most filters need replacing. This system needs none of it, keeping running costs low for Melbourne homes.
| What it takes to run | Conventional Softener | Reverse Ionization This System |
|---|---|---|
| Salt | No bags of brine to buy, haul, and refill | No salt, no backwash, no mess |
| Chemicals | Additives and by-products to manage | No additives and no by-products |
| Electricity | No outlet needed—and nothing to reset | Works 24/7 automatically, unpowered |
| Filters | Cartridges on a replacement schedule | Nothing to replace |
| Upkeep | Regeneration cycles and routine service | High performance with no routine upkeep |
| Running cost | Salt, power and consumables every year | Lower utility and repair costs |
| Build | Tanks, valves and moving parts | Premium 304 stainless steel |
Swipe the table sideways to compare both columns.
Installed for $895—a straightforward price for Melbourne homeowners.
One stainless unit, plumbed in at the main line, conditioning every tap in the house with a 86% scale inhibition rate and a 17.6 GPM flow rate. Great for Melbourne’s moderate hardness and mineral content. It suits city or well water in homes with hardness below 300 ppm. If you’re not sure how hard your water is, we’ll test it during the visit.
Key Benefits
Scale quietly costs you money—lower pressure, shorter appliance life, more repairs. In humid, coastal Melbourne, stopping mineral buildup and spotting makes a real difference.
Results vary with source water and household usage. We test your water on the visit so you know what you’re starting from in Melbourne.
Ideal For
Installed on the main line where water enters your Brevard County home, it treats everything downstream—your plumbing, water-using appliances, and even outdoor irrigation.
Cleaner Water. Better Living. Here on the Space Coast.
Installed by a Florida plumbing company that knows Space Coast homes—and stands behind the work.
A premium 304 stainless body—built to help resist coastal corrosion—with an internal alloy rated for up to ten years of service.
No salt, no power, no filters, and no regeneration cycle—simple, low-hassle protection for Melbourne homes.
We stand behind our products and the quality of our work here in Melbourne.
Join homeowners across Brevard County who choose Mr. Pure Water.
Cleaner Water. Better Living. Melbourne, FL.
Conditioned water is gentler to wash in, helping skin and hair feel softer—even with Melbourne’s coastal humidity.
Helps eliminate the spotting and buildup that fogs shower glass and rings fixtures in humid Melbourne.
Soap works more efficiently, so you use less and rinse cleaner—great in humid Melbourne homes.
The Mr. Pure Water Whole-House Reverse-Ionization System treats your water at the main line—ideal for Melbourne and the Space Coast—without salt, chemicals, filters, or a power supply. Hard water enters carrying calcium, magnesium, iron, and heavy metals. Inside the premium 304 stainless body, a turbulent flow chamber brings the water into full contact with a catalytic core that physically decomposes those minerals into microscopic particles and ions. A controlled electromagnetic field then exchanges their ionic charge and reverses their polarization, reorganizing the minerals with the water molecules so they can no longer crystallize or combine with acid radical ions—which is what produces the 86% scale inhibition effect. A polished flow chamber stabilizes the water before it exits, and it exits clean, soft, scale-free, and corrosion-resistant with its healthy minerals intact—helpful in our humid, coastal air where corrosion can be harder on exposed plumbing. The internal alloy keeps releasing free electrons for up to ten years with no disassembly and no routine maintenance, at a 17.6 GPM flow rate, with no wastewater and nothing discharged to a drain.
Prevents new scale and helps break down deposits already inside your home’s pipes.
Reducing scale in the pipes helps keep water flowing strong—especially with Melbourne’s mineral content and humid conditions.
Helps cut the moderate-hard-water spotting Melbourne homeowners see on dishes and fixtures.
Helps keep scale off heating elements—ideal for Melbourne’s mineral-content water.
Detergent lathers and rinses better, so you use less each wash.
No salt, no filters, and no service calls—built for years of Space Coast living.
Limited-Time Offer
$895
Installed
Regularly
321-400-9302
info@bestwaterheater.com
