It’s not just filtration, it’s transformation—softer water and scale protection for Mission Bay homes, without salt tanks, chemicals, or cartridges to replace.
Advanced Technology Inside
Proprietary reverse-ionization technology physically decomposes hard water minerals down to a molecular level while exchanging their ionic charge, using a controlled electromagnetic field to restructure water into a balanced, healthier state—without salt, chemicals, or filters. It softens water and helps prevent scale without the salt tanks or pressure pumps most water softeners require—ideal for Mission Bay, Florida living.
Creates a controlled turbulence zone for maximum contact and efficiency.
Breaks down hardness physically through catalytic media decomposition, without chemicals—great for Mission Bay water.
Creates ionization and enhances the transfer and efficiency of all ions.
Stabilizes and conditions the water before it exits the system—ready for everyday use in Mission Bay.
Technical Specifications
Premium 304 stainless steel, no external power supply, no chemicals, and no wastewater—ideal for Mission Bay living. The internal alloy keeps releasing electrons for up to ten years with no disassembly and no routine maintenance in that time.
86%
Scale inhibition rate
17.6 GPM
Flow rate
10 yr
Alloy service life
0 W
External power needed
Fits most standard pipes, plumbed in where the water enters your Mission Bay, Florida home.
Treats water mains up to three kilometres in length.
The recommended water hardness range for your Mission Bay system.
Stainless steel built to sit on your Mission Bay main line for the long haul.
No outlet, no controller, nothing to reset after an outage—simple for Mission Bay homes.
Nothing is discharged to a drain, and healthy minerals stay in the water—great for Mission Bay households.
Limited-Time Offer
$895
Installed
Regularly

Stainless conditioning unit, fittings, mounting hardware & all parts.

Plumbed into your main line in Mission Bay and commissioned by pros.

We test your Mission Bay water so you know what you’re starting from.

No surprises for Mission Bay homeowners. One low price includes everything.

No salt to buy, no filters to replace, and no electricity to run—simple for Mission Bay homes.

Treated at the source, for the whole Mission Bay home.
How It Works
Hard water enters the system carrying calcium, magnesium, and other minerals—and leaves clean, soft, scale-free, and corrosion-resistant for Mission Bay, Florida homes.
Decomposition and charge exchange—not ion swapping.
The alloy inside the device changes the structure of the metal ions passing through it, leaving calcium and magnesium ions unable to crystallize. Preventing those ions from combining with acid radical ions is what produces the scale inhibition effect. An internal diversion device pressurizes the water flow and brings it into full contact with the alloy, so the alloy releases free electrons efficiently.
Hard water enters the system carrying calcium, magnesium, and other minerals—common culprits behind buildup in Mission Bay, Florida homes.
A catalytic core physically decomposes minerals, breaking them down into microscopic particles and ions.
Ionic charge is exchanged, and minerals are reorganized with water molecules at the microscopic level.
Water exits clean, soft, scale-free and corrosion-resistant—great for Mission Bay homes.
It works on the scale you already have—great for established Mission Bay homes.
The system helps prevent and reduce new scale, and it also softens and removes scale that’s already built up inside your Mission Bay plumbing.
Mineral Decomposition & Ion Exchange
The minerals are not stripped out and swapped for sodium. They are decomposed, recharged and reorganized—so your Mission Bay water leaves balanced rather than stripped.
Why It’s Different
Most water softeners need a brine tank, a drain line and a power supply, and most filters need replacing. This system needs none of it—great for Mission Bay homes and the humid subtropical climate we live in.
| What it takes to run | Conventional Softener | Reverse Ionization This System |
|---|---|---|
| Salt | Bags of brine to buy, carry, and refill | No salt, no backwash, no mess |
| Chemicals | Additives and by-products to manage | No additives and no by-products |
| Electricity | An outlet and a controller to reset | Works 24/7 automatically, unpowered |
| Filters | Cartridges on a replacement schedule | Nothing to replace |
| Upkeep | Regeneration cycles and routine service | High performance with no routine upkeep |
| Running cost | Salt, power and consumables every year | Lower utility and repair costs |
| Build | Tanks, valves and moving parts | Premium 304 stainless steel |
Swipe the table sideways to compare both columns.
Installed for $895 - regularly $1,500.
One stainless unit, plumbed in at the main line, conditioning every tap in your Mission Bay home with an 86% scale inhibition rate and a 17.6 GPM flow rate. It suits city or well water in homes with hardness below 300 ppm. If you’re not sure how hard your water is, we’ll test it as part of the visit.
Key Benefits
Scale is what quietly costs you money—reducing pressure, shortening appliance life, and driving up repair bills. Here’s what changes once your water stops depositing it.
Results vary with source water and household usage. We test your Mission Bay water on the visit so you know what you’re starting from.
Ideal For
It sits on the main line, so everything downstream is treated—your plumbing, the appliances that heat and hold water, and even outdoor irrigation around your Mission Bay, Florida home.
Cleaner Water. Better Living in Mission Bay.
Installed by a Florida plumbing company that’s been doing this a long time—and stands behind the work for Mission Bay homeowners.
A premium 304 stainless body with an internal alloy rated for up to ten years of service.
No salt, no power, no filters, and no regeneration cycle—very little to think about for busy Mission Bay households.
We stand behind our products and the quality of our service in Mission Bay.
Join the homeowners across Florida—including right here in Mission Bay—who choose Mr. Pure Water.
Cleaner Water. Better Living. Mission Bay.
Conditioned water is gentler to wash in, leaving Mission Bay skin and hair feeling soft—not stripped.
Helps eliminate the spotting and buildup that fogs shower glass and rings your fixtures in Mission Bay.
Soap and detergent work more efficiently, so Mission Bay homes use less and rinse cleaner.
The Mr. Pure Water Whole-House Reverse-Ionization System treats your water at the main line, and it does it without salt, chemicals, filters or a power supply—ideal for Mission Bay living. Hard water enters carrying calcium, magnesium, iron and heavy metals. Inside the premium 304 stainless body, a turbulent flow chamber brings the water into full contact with a catalytic core that physically decomposes those minerals into microscopic particles and ions. A controlled electromagnetic field then exchanges their ionic charge and reverses their polarization, reorganizing the minerals with the water molecules so they can no longer crystallize or combine with acid radical ions—which is what produces the 86% scale inhibition effect. A polished flow chamber stabilizes the water before it exits, and it exits clean, soft, scale-free and corrosion-resistant with its healthy minerals intact. The internal alloy keeps releasing free electrons for up to ten years with no disassembly and no routine maintenance, at a 17.6 GPM flow rate, with no wastewater and nothing discharged to a drain.
Limited-Time Offer
$895
Installed
Regularly