It’s not just filtration—it’s transformation for Oakland, FL. Softer water and scale protection for the whole home, without salt tanks, chemicals, or cartridges to replace.
Advanced Technology Inside
Proprietary reverse-ionization technology physically decomposes hard water minerals down to a molecular level while exchanging their ionic charge, using a controlled electromagnetic field to restructure water into a balanced, healthier state—without salt, chemicals, or filters. A great fit for Oakland’s moderately hard water, it softens and helps prevent scale without the salt tanks or pressure pumps most water softeners require.
Creates a controlled turbulence zone for maximum contact and efficiency.
Breaks down moderate hardness physically through catalytic media decomposition—no chemicals.
Creates ionization and enhances the transfer and efficiency of all ions.
Stabilizes and conditions the water before it exits the system.
Technical Specifications
Premium 304 stainless steel, no external power supply, no chemicals, and no wastewater—great for Oakland homes. The internal alloy keeps releasing electrons for up to ten years with no disassembly and no routine maintenance in that time.
86%
Scale inhibition rate
17.6 GPM
Flow rate
10 yr
Alloy service life
0 W
External power needed
Fits most standard pipes, plumbed in where the water enters your Oakland home.
Treats water mains up to three kilometres in length.
Recommended hardness range for Oakland’s moderate hard water.
Stainless steel built to handle Oakland’s humid Central Florida conditions.
No outlet, no controller, nothing to reset after an outage in Oakland.
Nothing is discharged to a drain, and healthy minerals stay in your Oakland water.
Limited-Time Offer
$895
Installed
Regularly

Stainless conditioning unit, fittings, mounting hardware & all parts.

Plumbed into your main line and commissioned by pros serving Oakland, FL.

We test your Oakland water so you know what you’re starting from.

No surprises—one low price for Oakland homeowners includes everything.

No salt to buy, no filters to replace, and no electricity to run in your Oakland home.

Treated at the source, for the whole Oakland home.
How It Works
Oakland’s moderately hard water enters carrying calcium, magnesium, and other minerals—and leaves clean, soft, scale-free, and more corrosion-resistant throughout your home.
Decomposition and charge exchange, not ion swapping
The alloy inside the device changes the structure of the metal ions passing through it, leaving calcium and magnesium ions unable to crystallize. Preventing those ions from combining with acid radical ions is what produces the scale inhibition effect. An internal diversion device pressurizes the water flow and brings it into full contact with the alloy, so the alloy releases free electrons efficiently—ideal for Oakland’s moderate hard water.
Oakland’s moderately hard water enters the system carrying calcium, magnesium, and other minerals.
A catalytic core physically decomposes minerals, breaking them down into microscopic particles and ions.
Ionic charge is exchanged and minerals are reorganized with water molecules at the microscopic level.
Water exits clean, soft, scale-free, and corrosion-resistant—ideal for Oakland, FL.
It works on the scale you already have
The system helps prevent and reduce new scale, and it also softens and removes scale already built up inside your plumbing—common with moderate hardness in Oakland.
Mineral Decomposition & Ion Exchange
The minerals are not stripped out and swapped for sodium. They are decomposed, recharged and reorganized—so Oakland water leaves balanced rather than stripped.
Why It’s Different in Oakland
Most water softeners need a brine tank, a drain line and a power supply, and most filters need replacing. This system needs none of it—helpful for Oakland homes in Central Florida’s humid climate.
| What it takes to run | Conventional Softener | Reverse Ionization This System |
|---|---|---|
| Salt | Bags of brine to buy, carry and refill | No salt, no backwash, no mess |
| Chemicals | Additives and by-products to manage | No additives and no by-products |
| Electricity | An outlet and a controller to reset | Works 24/7 automatically, unpowered—great for Oakland homes |
| Filters | Cartridges on a replacement schedule | Nothing to replace |
| Upkeep | Regeneration cycles and routine service | High performance with no routine upkeep |
| Running cost | Salt, power and consumables every year | Lower utility and repair costs |
| Build | Tanks, valves and moving parts | Premium 304 stainless steel |
Swipe the table sideways to compare both columns.
Installed for $895 - regularly $1,500.
One stainless unit, plumbed in at the main line, conditioning every tap in your Oakland home with an 86% scale inhibition rate and a 17.6 GPM flow rate. It suits city or well water in Orange County homes with hardness below 300 ppm. If you’re not sure how hard your water is, we’ll test it as part of the visit.
Key Benefits
Scale quietly costs you money—pressure, appliance life, and repair bills. With Oakland’s moderate hard water, stopping deposits is what changes everything.
Results vary with source water and household usage. We test your Oakland-area water on the visit so you know what you’re starting from.
Ideal For
It installs on the main line, so everything downstream is treated—your plumbing, the appliances that heat and hold water, and even irrigation outside in Oakland’s warm, humid climate.
Cleaner Water. Better Living. Right here in Oakland.
Installed by a Florida plumbing company serving Orange County that’s been doing this a long time—and stands behind the work.
A premium 304 stainless body with an internal alloy rated for up to ten years of service in Oakland homes.
No salt, no power, no filters, and no regeneration cycle—very little to think about for busy Oakland households.
We stand behind our products and the quality of our Oakland service.
Join homeowners across Orange County—including right here in Oakland—who choose Mr. Pure Water.
Cleaner Water. Better Living. In Oakland.
Conditioned water is gentler to wash in—helpful in humid Central Florida homes like Oakland.
Helps eliminate the spotting and buildup that fogs shower glass and rings fixtures in Oakland.
Soap and detergent work better with Oakland’s moderate hardness—use less, rinse cleaner.
The Mr. Pure Water Whole-House Reverse-Ionization System treats your water at the main line, and it does it without salt, chemicals, filters or a power supply. Hard water enters carrying calcium, magnesium, iron and heavy metals. Inside the premium 304 stainless body, a turbulent flow chamber brings the water into full contact with a catalytic core that physically decomposes those minerals into microscopic particles and ions. A controlled electromagnetic field then exchanges their ionic charge and reverses their polarization, reorganizing the minerals with the water molecules so they can no longer crystallize or combine with acid radical ions - which is what produces the 86% scale inhibition effect. A polished flow chamber stabilizes the water before it exits, and it exits clean, soft, scale-free and corrosion-resistant with its healthy minerals intact. The internal alloy keeps releasing free electrons for up to ten years with no disassembly and no routine maintenance, at a 17.6 GPM flow rate, with no wastewater and nothing discharged to a drain—ideal for Oakland’s moderate hard water and Central Florida’s humid subtropical conditions.
Limited-Time Offer
$895
Installed
Regularly