Phone: 561-300-5075
info@bestwaterheater.com
Phone: 561-300-5075
info@bestwaterheater.com
Phone: 561-300-5075
info@bestwaterheater.com
It’s not just filtration, it’s transformation—softer water and scale protection for Pelican Lake homes, without salt tanks, chemicals, or cartridges to replace.
Advanced Technology Inside
Proprietary reverse-ionization technology physically decomposes hard water minerals down to a molecular level while exchanging their ionic charge, using a controlled electromagnetic field to restructure water into a balanced, healthier state—without salt, chemicals, or filters. It softens water and helps prevent scale without the salt tanks or pressure pumps most water softeners require—ideal for many Florida homes on groundwater.
Creates a controlled turbulence zone for maximum contact and efficiency.
Breaks down hardness physically through catalytic media decomposition, without chemicals—great for Florida groundwater.
Creates ionization and enhances the transfer and efficiency of all ions.
Stabilizes and conditions the water before it exits the system.
Technical Specifications
Premium 304 stainless steel, no external power supply, no chemicals, and no wastewater—ideal for Pelican Lake’s humid subtropical climate. The internal alloy keeps releasing electrons for up to ten years with no disassembly and no routine maintenance in that time.
86%
Scale inhibition rate
17.6 GPM
Flow rate
10 yr
Alloy service life
0 W
External power needed
Fits most standard pipes, installed where the water enters your Pelican Lake home.
Treats water mains up to three kilometres in length.
The recommended hardness range for your Pelican Lake water.
A stainless steel body built to sit on your Pelican Lake main line for the long haul.
No outlet, no controller, nothing to reset after an outage in Pelican Lake.
Nothing is discharged to a drain, and healthy minerals stay in your Pelican Lake water.
Limited-Time Offer
$895
Installed
Regularly
Stainless conditioning unit, fittings, mounting hardware, and all parts.
Plumbed into your main line and professionally commissioned in Pelican Lake.
We test your Pelican Lake water so you know what you’re starting from.
No surprises—one low price includes everything for your Pelican Lake home.
No salt to buy, no filters to replace, and no electricity to run.
Treated at the source, for the whole Pelican Lake home.
How It Works
Hard water can bring in calcium, magnesium, and other minerals—common in Florida groundwater. It leaves clean, soft, scale-free, and more corrosion-resistant for everyday use in Pelican Lake.
Decomposition and charge exchange—not ion swapping.
The alloy inside the device changes the structure of the metal ions passing through it, leaving calcium and magnesium ions unable to crystallize. Preventing those ions from combining with acid radical ions is what produces the scale inhibition effect. An internal diversion device pressurizes the water flow and brings it into full contact with the alloy, so the alloy releases free electrons efficiently.
Hard water enters the system carrying calcium, magnesium, and other minerals—often found in Florida groundwater.
A catalytic core physically decomposes minerals, breaking them down into microscopic particles and ions.
Ionic charge is exchanged and minerals are reorganized with water molecules at the microscopic level.
Water exits clean, soft, scale-free and corrosion-resistant—great for Pelican Lake homes.
It works on the scale you already have
Helps prevent and reduce new scale, and can also soften and remove scale already built up inside your plumbing—common with Floridan Aquifer groundwater in Florida.
Mineral Decomposition & Ion Exchange
The minerals aren’t stripped out and swapped for sodium. They’re decomposed, recharged, and reorganized—so Pelican Lake water leaves balanced rather than stripped.
Why It’s Different
Most water softeners need a brine tank, a drain line, and a power supply—and most filters need replacing. This system needs none of it, which helps keep costs down for Pelican Lake homeowners.
| What it takes to run | Conventional Softener | Reverse Ionization This System |
|---|---|---|
| Salt | Bags of brine to buy, carry, and refill | No salt, no backwash, no mess |
| Chemicals | Additives and by-products to manage | No additives and no by-products |
| Electricity | An outlet and a controller to reset | Works 24/7 automatically, unpowered |
| Filters | Cartridges on a replacement schedule | Nothing to replace |
| Upkeep | Regeneration cycles and routine service | High performance with no routine upkeep |
| Running cost | Salt, power and consumables every year | Lower utility and repair costs |
| Build | Tanks, valves and moving parts | Premium 304 stainless steel |
Swipe the table sideways to compare both columns.
Installed for $895 - regularly $1,500.
One stainless unit, plumbed in at the main line, conditioning every tap in your Pelican Lake home with an 86% scale inhibition rate and a 17.6 GPM flow rate. It suits city or well water in homes with hardness below 300 ppm. If you’re not sure how hard your water is, we’ll test it during the visit.
Key Benefits
Scale is what quietly costs you money—in pressure, appliance life, and repair bills. Here in Pelican Lake, this is what changes once water stops depositing it.
Results vary with source water and household usage. In Pelican Lake, we test your water on the visit so you know what you’re starting from.
Ideal For
Installed on the main line, it treats everything downstream—your plumbing, the appliances that heat and hold water, and even outdoor irrigation. A smart fit for Pelican Lake’s humid subtropical climate and year-round water use.
Cleaner Water. Better Living—in Pelican Lake.
Installed by a Florida plumbing company that’s been doing this a long time—and stands behind the work for Pelican Lake homeowners.
A premium 304 stainless body with an internal alloy rated for up to ten years of service.
No salt, no power, no filters, and no regeneration cycle—very little to think about in your Pelican Lake home.
We stand behind our products and the quality of service in Pelican Lake.
Join Pelican Lake homeowners who choose Mr. Pure Water.
Cleaner Water. Better Living. In Pelican Lake.
Conditioned water is gentler to wash in, leaving skin and hair feeling softer—welcome relief in Florida’s humid subtropical climate.
Helps eliminate the spotting and buildup that fogs shower glass and rings your fixtures in Pelican Lake.
Soap and detergent work more efficiently, so Pelican Lake homes use less and rinse cleaner.
The Mr. Pure Water Whole-House Reverse-Ionization System treats your water at the main line, and it does it without salt, chemicals, filters, or a power supply—ideal for Pelican Lake homes. Much of Florida relies on groundwater from the Floridan Aquifer, where hardness can vary by locality. Hard water enters carrying calcium, magnesium, iron, and heavy metals. Inside the premium 304 stainless body, a turbulent flow chamber brings the water into full contact with a catalytic core that physically decomposes those minerals into microscopic particles and ions. A controlled electromagnetic field then exchanges their ionic charge and reverses their polarization, reorganizing the minerals with the water molecules so they can no longer crystallize or combine with acid radical ions—which is what produces the 86% scale inhibition effect. A polished flow chamber stabilizes the water before it exits, and it exits clean, soft, scale-free, and corrosion-resistant with its healthy minerals intact. The internal alloy keeps releasing free electrons for up to ten years with no disassembly and no routine maintenance, at a 17.6 GPM flow rate, with no wastewater and nothing discharged to a drain.
Helps prevent new scale and break down deposits already inside Pelican Lake pipes.
Clearing scale out of the pipes keeps water moving the way it should—important with Florida groundwater mineral content.
Helps cut hard-water spotting on dishes, glassware, and fixtures in Pelican Lake homes.
Keeps scale off heating elements in water heaters, dishwashers and washers in Pelican Lake.
Detergent lathers and rinses better, so you use less every wash—perfect for Pelican Lake.
No salt, no filters, and no service calls—built for long-term use in Pelican Lake.
Limited-Time Offer
$895
Installed
Regularly
561-300-5075
info@bestwaterheater.com
