Phone: 850-772-1365
info@bestwaterheater.com
Phone: 850-772-1365
info@bestwaterheater.com
Phone: 850-772-1365
info@bestwaterheater.com
It’s not just filtration—it’s transformation. Softer water and scale protection for your whole Pinetta home, without salt tanks, chemicals, or cartridges to replace.
Advanced Technology Inside
Proprietary reverse-ionization technology physically decomposes hard water minerals down to a molecular level while exchanging their ionic charge, using a controlled electromagnetic field to restructure water into a balanced, healthier state—without salt, chemicals, or filters. It softens water and helps prevent scale in Pinetta homes without the salt tanks or pressure pumps most water softeners require.
Creates a controlled turbulence zone for maximum contact and efficiency in your Pinetta plumbing.
Breaks down hardness physically through catalytic media decomposition—no chemicals needed for Pinetta homes.
Creates ionization and enhances the transfer and efficiency of all ions.
Stabilizes and conditions the water before it exits the system.
Technical Specifications
Premium 304 stainless steel, no external power supply, no chemicals, and no wastewater—an easy fit for Pinetta households. The internal alloy keeps releasing electrons for up to ten years with no disassembly and no routine maintenance in that time.
86%
Scale inhibition rate
17.6 GPM
Flow rate
10 yr
Alloy service life
0 W
External power needed
Fits most standard pipes, plumbed in where the water enters your Pinetta home.
Treats water mains up to three kilometres in length.
The recommended water hardness range for your Pinetta home’s system.
A stainless steel body built to sit on your Pinetta main line for the long haul.
No outlet, no controller, nothing to reset after an outage in your Pinetta home.
Nothing is discharged to a drain, and healthy minerals stay in the water for your Pinetta household.
Limited-Time Offer
$895
Installed
Regularly
Stainless conditioning unit, fittings, mounting hardware, and all parts—ready for Pinetta installs.
Plumbed into your main line and commissioned by pros serving Pinetta.
We test your water in Pinetta so you know exactly what you’re starting from.
No surprises—one low price includes everything for your Pinetta install.
No salt to buy, no filters to replace, and no electricity to run—easy for busy Pinetta households.
Treated at the source for your whole Pinetta home.
How It Works
Hard water enters the system carrying calcium, magnesium, and other minerals, and leaves clean, soft, scale-free, and corrosion-resistant for your Pinetta home.
Decomposition and charge exchange, not ion swapping
The alloy inside the device changes the structure of the metal ions passing through it, leaving calcium and magnesium ions unable to crystallize. Preventing those ions from combining with acid radical ions is what produces the scale inhibition effect. An internal diversion device pressurizes the water flow and brings it into full contact with the alloy, so the alloy releases free electrons efficiently—helping protect Pinetta plumbing.
Hard water in Pinetta can carry calcium, magnesium, and other minerals into your plumbing.
A catalytic core physically decomposes minerals, breaking them down into microscopic particles and ions.
Ionic charge is exchanged and minerals are reorganized with water molecules at the microscopic level.
Water exits clean, soft, scale-free, and corrosion-resistant—ready for everyday life in Pinetta.
It works on the scale you already have in your Pinetta home
This system helps prevent and reduce new scale, and it can also soften and break down scale already built up inside your plumbing—great for many Pinetta homes.
Mineral Decomposition & Ion Exchange
The minerals aren’t stripped out and swapped for sodium. They’re decomposed, recharged, and reorganized—so the water leaves balanced rather than stripped for Pinetta homes.
Why It’s Different
Most water softeners need a brine tank, a drain line, and a power supply—and most filters need replacing. This system needs none of it, which helps keep costs down for Pinetta homeowners.
| What it takes to run | Conventional Softener | Reverse Ionization This System |
|---|---|---|
| Salt | Bags of brine to buy, carry, and refill | No salt, no backwash, no mess |
| Chemicals | Additives and by-products to manage | No additives and no by-products |
| Electricity | An outlet and a controller to reset | Works 24/7 automatically, unpowered |
| Filters | Cartridges on a replacement schedule for Pinetta homes | Nothing to replace |
| Upkeep | Regeneration cycles and routine service | High performance with no routine upkeep |
| Running cost | Salt, power and consumables every year | Lower utility and repair costs |
| Build | Tanks, valves and moving parts | Premium 304 stainless steel |
Swipe the table sideways to compare both columns.
Installed for $895 - regularly $1,500.
One stainless unit, plumbed in at the main line, conditioning every tap in the house with a 86% scale inhibition rate and a 17.6 GPM flow rate. It suits city or well water in Pinetta homes with hardness below 300 ppm. If you’re not sure how hard your water is, we’ll test it as part of the visit.
Key Benefits
Scale is what quietly costs you money—water pressure, appliance life, and repair bills. Here’s what changes in Pinetta once your water stops depositing it.
Results vary with source water and household usage. We test your water during the Pinetta visit so you know what you’re starting from.
Ideal For
It installs on your main line, so everything in your Pinetta home is treated—your plumbing, water-using appliances, and even outdoor irrigation.
Cleaner Water. Better Living. In Pinetta.
Installed by a Florida plumbing company that’s been doing this a long time—and stands behind the work for Pinetta homeowners.
A premium 304 stainless body with an internal alloy rated for up to ten years of service.
No salt, no power, no filters, and no regeneration cycle—simple for Pinetta homes.
We stand behind our products and the quality of service we provide in Pinetta.
Join the homeowners across Florida—including right here in Pinetta—who choose Mr. Pure Water.
Cleaner Water. Better Living. In Pinetta.
Conditioned water is gentler to wash in, leaving skin and hair feeling softer for families in Pinetta.
Helps eliminate the spotting and buildup that fogs shower glass and rings fixtures in Pinetta.
Soap and detergent work more efficiently, so Pinetta households use less and rinse cleaner.
The Mr. Pure Water Whole-House Reverse-Ionization System treats your water at the main line in your Pinetta home—and it does it without salt, chemicals, filters, or a power supply. Hard water enters carrying calcium, magnesium, iron, and heavy metals. Inside the premium 304 stainless body, a turbulent flow chamber brings the water into full contact with a catalytic core that physically decomposes those minerals into microscopic particles and ions. A controlled electromagnetic field then exchanges their ionic charge and reverses their polarization, reorganizing the minerals with the water molecules so they can no longer crystallize or combine with acid radical ions—which is what produces the 86% scale inhibition effect. A polished flow chamber stabilizes the water before it exits, and it exits clean, soft, scale-free, and corrosion-resistant with its healthy minerals intact. The internal alloy keeps releasing free electrons for up to ten years with no disassembly and no routine maintenance, at a 17.6 GPM flow rate, with no wastewater and nothing discharged to a drain.
Helps prevent new scale and break down deposits already inside your Pinetta home’s pipes.
Clearing scale out of your pipes helps keep water moving the way it should in your Pinetta home.
Helps cut hard-water spotting on dishes, glassware, and fixtures in Pinetta.
Keeps scale off heating elements in water heaters, dishwashers, and washers in Pinetta.
Detergent lathers and rinses better, so you use less of it every wash in Pinetta.
No salt, no filters, and no service calls—built for up to ten years of operation in Pinetta.
Limited-Time Offer
$895
Installed
Regularly
850-772-1365
info@bestwaterheater.com
