It’s not just filtration, it’s transformation—softer water and scale protection for Pinewood homes, without salt tanks, chemicals, or cartridges to replace.
Advanced Technology Inside
Proprietary reverse-ionization technology physically decomposes hard water minerals down to a molecular level while exchanging their ionic charge, using a controlled electromagnetic field to restructure water into a balanced, healthier state—without salt, chemicals, or filters. It softens water and helps prevent scale for Pinewood homes, whether you’re on municipal water or a private well, without the salt tanks or pressure pumps most water softeners require.
Creates a controlled turbulence zone for maximum contact and efficiency.
Breaks down hardness physically through catalytic media decomposition—no chemicals.
Creates ionization and enhances the transfer and efficiency of all ions.
Stabilizes and conditions the water before it exits the system—ideal for humid Florida living.
Technical Specifications
Premium 304 stainless steel, no external power supply, no chemicals, and no wastewater—ideal for Pinewood homes concerned about scaling and corrosion. The internal alloy keeps releasing electrons for up to ten years with no disassembly and no routine maintenance in that time.
86%
Scale inhibition rate
17.6 GPM
Flow rate
10 yr
Alloy service life
0 W
External power needed
Fits most standard pipes, plumbed in where the water enters the home—great for Pinewood houses on city water or wells.
Treats water mains up to three kilometres in length.
The recommended hardness range based on your Pinewood water source.
A stainless steel body built to sit on your main line for the long haul in Pinewood.
No outlet, no controller, nothing to reset after an outage—simple for Pinewood households.
Nothing is discharged to a drain, and healthy minerals stay in the water.
Limited-Time Offer
$895
Installed
Regularly

Stainless conditioning unit, fittings, mounting hardware & all parts.

Plumbed into your main line and commissioned by Pinewood pros.

We test your Pinewood water so you know what you’re starting from.

No surprises—one low price includes everything for your Pinewood home.

No salt to buy, no filters to replace, and no electricity to run—ideal for Pinewood homes.

Treated at the source, for the whole Pinewood home.
How It Works
Hard water enters the system carrying calcium, magnesium, and other minerals—common culprits behind scaling and corrosion concerns in many Florida homes—and leaves clean, soft, scale-free, and more corrosion-resistant.
Decomposition and charge exchange—not ion swapping
The alloy inside the device changes the structure of the metal ions passing through it, leaving calcium and magnesium ions unable to crystallize. Preventing those ions from combining with acid radical ions is what produces the scale inhibition effect. An internal diversion device pressurizes the water flow and brings it into full contact with the alloy, so the alloy releases free electrons efficiently.
Hard water enters the system carrying calcium, magnesium, and other minerals—often tied to scaling and corrosion concerns in Florida.
A catalytic core physically decomposes minerals, breaking them down into microscopic particles and ions—helping reduce Florida-style scale buildup.
Ionic charge is exchanged and minerals are reorganized with water molecules at the microscopic level to help defend against scale and corrosion concerns common in Florida.
Water exits clean, soft, scale-free and corrosion-resistant—great for Pinewood homes.
It works on the scale you already have—common in many Florida water supplies.
The system helps prevent and reduce new scale and can also soften and remove scale already built up inside your plumbing—great for Pinewood’s mineral scaling concerns.
Mineral Decomposition & Ion Exchange
The minerals aren’t stripped out and swapped for sodium. They’re decomposed, recharged, and reorganized—so Pinewood homes get balanced water, not “empty” water.
Why It’s Different
Most water softeners need a brine tank, a drain line and power—and most filters need replacing. This system needs none of it, which helps keep costs down for Pinewood homeowners.
| What it takes to run | Conventional Softener | Reverse Ionization This System |
|---|---|---|
| Salt | Bags of brine to buy, carry, and refill | No salt, no backwash, no mess |
| Chemicals | Additives and by-products to manage | No additives and no by-products |
| Electricity | An outlet and a controller to reset | Works 24/7 automatically, unpowered |
| Filters | Cartridges on a replacement schedule | Nothing to replace |
| Upkeep | Regeneration cycles and routine service | High performance with no routine upkeep |
| Running cost | Salt, power and consumables every year | Lower utility and repair costs |
| Build | Tanks, valves and moving parts | Premium 304 stainless steel |
Swipe the table sideways to compare both columns.
Installed for $895 - regularly $1,500.
One stainless unit, plumbed in at the main line, conditioning every tap in the house with an 86% scale inhibition rate and a 17.6 GPM flow rate. It suits municipal supply or private well water—common setups around Pinewood—when hardness is below 300 ppm. Not sure how hard your water is? We’ll test it during the visit.
Key Benefits
Scale quietly costs you money—lower pressure, shorter appliance life, more repairs. In humid Pinewood, stopping scale buildup makes a difference you’ll notice.
Results vary with source water and household usage. In Pinewood, we test your water during the visit so you know what you’re starting from.
Ideal For
It installs on the main line, so everything downstream is treated—your plumbing, the appliances that heat and hold water, and even outdoor irrigation. Great for Pinewood homes on municipal water or private wells.
Cleaner Water. Better Living. In Pinewood.
Installed by a Florida plumbing company that knows Pinewood homes—and stands behind the work.
A premium 304 stainless body with an internal alloy rated for up to ten years of service.
No salt, no power, no filters, and no regeneration cycle—very little to think about for Pinewood homeowners.
We stand behind our products and the quality of our service in Pinewood.
Join Pinewood homeowners across South Florida who choose Mr. Pure Water.
Cleaner Water. Better Living. In Pinewood.
Conditioned water is gentler to wash in, so skin and hair feel softer—especially helpful in Pinewood’s humid subtropical climate.
Helps eliminate the spotting and buildup that fogs shower glass and rings your fixtures in Pinewood.
Soap and detergent work more efficiently, so Pinewood homes use less and rinse cleaner.
The Mr. Pure Water Whole-House Reverse-Ionization System treats your water at the main line, and it does it without salt, chemicals, filters or a power supply. In Pinewood, homes may be on municipal water or private wells—either way, mineral scaling and corrosion concerns can show up over time. Hard water enters carrying calcium, magnesium, iron and heavy metals. Inside the premium 304 stainless body, a turbulent flow chamber brings the water into full contact with a catalytic core that physically decomposes those minerals into microscopic particles and ions. A controlled electromagnetic field then exchanges their ionic charge and reverses their polarization, reorganizing the minerals with the water molecules so they can no longer crystallize or combine with acid radical ions - which is what produces the 86% scale inhibition effect. A polished flow chamber stabilizes the water before it exits, and it exits clean, soft, scale-free and corrosion-resistant with its healthy minerals intact. The internal alloy keeps releasing free electrons for up to ten years with no disassembly and no routine maintenance, at a 17.6 GPM flow rate, with no wastewater and nothing discharged to a drain.
Limited-Time Offer
$895
Installed
Regularly