Phone: 850-772-1365
info@bestwaterheater.com
Phone: 850-772-1365
info@bestwaterheater.com
Phone: 850-772-1365
info@bestwaterheater.com
It’s not just filtration—it’s transformation. Softer water and scale protection for your whole Pinland, Florida home, without salt tanks, chemicals, or cartridges to replace.
Advanced Technology Inside
Proprietary reverse-ionization technology physically decomposes hard-water minerals down to a molecular level while exchanging their ionic charge, using a controlled electromagnetic field to restructure water into a balanced, healthier state—without salt, chemicals, or filters. It softens water and helps prevent scale without the salt tanks or pressure pumps most water softeners require.
Creates a controlled turbulence zone for maximum contact and efficiency.
Breaks down hardness physically through catalytic media decomposition—no chemicals added.
Creates ionization and enhances the transfer and efficiency of all ions.
Stabilizes and conditions the water before it exits the system.
Technical Specifications
Premium 304 stainless steel, no external power supply, no chemicals, and no wastewater. The internal alloy keeps releasing electrons for up to ten years with no disassembly and no routine maintenance in that time.
86%
Scale inhibition rate
17.6 GPM
Flow rate
10 yr
Alloy service life
0 W
No external power needed
Fits most standard pipes, plumbed in where the water enters your Pinland home.
Treats water mains up to three kilometres in length.
The recommended water hardness range for this system in Pinland, FL.
A stainless steel body built to sit on your main line for the long haul in Pinland, FL.
No outlet, no controller, nothing to reset after an outage—simple for Pinland homes.
Nothing is discharged to a drain, and healthy minerals stay in the water in your Pinland home.
Limited-Time Offer
$895
Installed
Regularly
Stainless conditioning unit, fittings, mounting hardware, and all parts included.
Plumbed into your main line and commissioned by pros serving Pinland, FL.
We test your Pinland water so you know what you’re starting from.
No surprises for Pinland homeowners. One low price includes everything.
No salt to buy, no filters to replace, and no electricity to run—ideal for Pinland homes.
Treated at the source for your whole Pinland home.
How It Works
Hard water enters the system carrying calcium, magnesium, and other minerals, and leaves clean, soft, scale-free, and corrosion-resistant for Pinland, FL homes.
Decomposition and charge exchange, not ion swapping
The alloy inside the device changes the structure of the metal ions passing through it, leaving calcium and magnesium ions unable to crystallize. Preventing those ions from combining with acid radical ions is what produces the scale inhibition effect. An internal diversion device pressurizes the water flow and brings it into full contact with the alloy, so the alloy releases free electrons efficiently.
In Pinland, hard water can carry calcium, magnesium, and other minerals into your plumbing.
A catalytic core physically decomposes minerals, breaking them down into microscopic particles and ions.
Ionic charge is exchanged and minerals are reorganized with water molecules at the microscopic level.
Water exits clean, soft, scale-free, and corrosion-resistant—throughout your Pinland home.
It works on the scale you already have
This system helps prevent and reduce new scale, and it can also soften and remove scale that’s already built up inside your Pinland home’s plumbing.
Mineral Decomposition & Ion Exchange
The minerals are not stripped out and swapped for sodium. They are decomposed, recharged, and reorganized—so the water leaves balanced rather than stripped.
Why It's Different
Most softeners need a brine tank, a drain line, and power—and most filters need replacing. In Pinland, this system needs none of it, which is where the running cost goes.
| What it takes to run | Conventional Softener | Reverse Ionization This System |
|---|---|---|
| Salt | Bags of brine to buy, carry and refill | No salt, no backwash, no mess |
| Chemicals | Additives and by-products to manage | No additives and no by-products |
| Electricity | An outlet and a controller to reset | Works 24/7 automatically, unpowered |
| Filters | Cartridges on a simple replacement schedule | Nothing to replace |
| Upkeep | Regeneration cycles and routine service | High performance with no routine upkeep |
| Running cost | Salt, power and consumables every year | Lower utility and repair costs |
| Build | Tanks, valves and moving parts | Premium 304 stainless steel |
Swipe the table sideways to compare both columns.
Installed for $895 - regularly $1,500.
One stainless unit, plumbed in at the main line, conditioning every tap in your Pinland home with an 86% scale inhibition rate and a 17.6 GPM flow rate. It suits city or well water in homes with hardness below 300 ppm. If you’re not sure how hard your water is, we’ll test it as part of the visit.
Key Benefits
Scale is what quietly costs you money—pressure, appliance life, and repair bills. Here’s what changes for Pinland homes once water stops depositing it.
Results vary with source water and household usage. We test your water in Pinland during the visit so you know what you’re starting from.
Ideal For
Installed on your main line in Pinland, it treats everything downstream—your plumbing, water-using appliances, and even outdoor irrigation.
Cleaner Water. Better Living. In Pinland.
Installed by a Florida plumbing company that’s been doing this a long time—and stands behind the work for Pinland homeowners.
A premium 304 stainless body with an internal alloy rated for up to ten years of service in Pinland homes.
No salt, no power, no filters, and no regeneration cycle—easy for Pinland homeowners.
We stand behind our products and the quality of our service in Pinland.
Join the Florida homeowners—including right here in Pinland—who choose Mr. Pure Water.
Cleaner Water. Better Living. In Pinland.
Conditioned water is gentler to wash in, so skin and hair feel softer—not stripped—after every shower in Pinland.
Helps eliminate the spotting and buildup that fogs shower glass and rings fixtures in Pinland.
Soap and detergent work more efficiently, so you use less and rinse cleaner—great for busy Pinland households.
The Mr. Pure Water Whole-House Reverse-Ionization System treats your Pinland water at the main line, and it does it without salt, chemicals, filters or a power supply. Hard water enters carrying calcium, magnesium, iron and heavy metals. Inside the premium 304 stainless body, a turbulent flow chamber brings the water into full contact with a catalytic core that physically decomposes those minerals into microscopic particles and ions. A controlled electromagnetic field then exchanges their ionic charge and reverses their polarization, reorganizing the minerals with the water molecules so they can no longer crystallize or combine with acid radical ions - which is what produces the 86% scale inhibition effect. A polished flow chamber stabilizes the water before it exits, and it exits clean, soft, scale-free and corrosion-resistant with its healthy minerals intact. The internal alloy keeps releasing free electrons for up to ten years with no disassembly and no routine maintenance, at a 17.6 GPM flow rate, with no wastewater and nothing discharged to a drain.
Helps prevent new scale and break down deposits already inside your Pinland pipes.
Clearing scale out of Pinland pipes helps keep water moving the way it should.
Helps eliminate hard-water spotting on dishes, glassware, and fixtures in Pinland homes.
Keeps scale off the heating elements in water heaters, dishwashers, and washers in Pinland homes.
Detergent lathers and rinses better, so you use less of it every wash at home in Pinland.
No salt, no filters, and no service calls for up to ten years of operation in Pinland.
Limited-Time Offer
$895
Installed
Regularly
850-772-1365
info@bestwaterheater.com
