Phone: 850-772-1365
info@bestwaterheater.com
Phone: 850-772-1365
info@bestwaterheater.com
Phone: 850-772-1365
info@bestwaterheater.com
It’s not just filtration—it’s transformation. Softer water and scale protection for your whole Point Baker home, without salt tanks, chemicals, or cartridges to replace.
Advanced Technology Inside
Proprietary reverse-ionization technology physically decomposes hard-water minerals down to a molecular level while exchanging their ionic charge, using a controlled electromagnetic field to restructure water into a balanced, healthier state—without salt, chemicals, or filters. It softens water and helps prevent scale in Point Baker homes without the salt tanks or pressure pumps most water softeners require.
Creates a controlled turbulence zone for maximum contact and efficiency.
Breaks down hardness physically through catalytic media decomposition—no chemicals needed.
Creates ionization and enhances the transfer and efficiency of all ions in your Point Baker water.
Stabilizes and conditions the water before it exits the system in your Point Baker home.
Technical Specifications
Premium 304 stainless steel, no external power supply, no chemicals, and no wastewater—ideal for Point Baker households. The internal alloy keeps releasing electrons for up to ten years with no disassembly and no routine maintenance in that time.
86%
Scale inhibition rate
17.6 GPM
Flow rate
10 yr
Alloy service life
0 W
No external power needed
Fits most standard pipes, plumbed in where the water enters your Point Baker home.
Treats water mains up to three kilometres in length—great for Point Baker properties.
The recommended water hardness range for your Point Baker system.
A stainless steel body built to sit on your main line for the long haul—great for Point Baker homes.
No outlet, no controller, nothing to reset after an outage in Point Baker.
Nothing is discharged to a drain, and healthy minerals stay in your Point Baker water.
Limited-Time Offer
$895
Installed
Regularly
Stainless conditioning unit, fittings, mounting hardware, and all parts for your Point Baker install.
Plumbed into your main line and commissioned by our professionals serving Point Baker.
We test your water in Point Baker so you know exactly what you’re starting from.
No surprises. One low price includes everything.
No salt to buy, no filters to replace, and no electricity to run—simple for Point Baker homes.
Treated at the source, for your whole Point Baker home.
How It Works
Hard water enters the system carrying calcium, magnesium, and other minerals, and leaves clean, soft, scale-free, and corrosion-resistant for your Point Baker home.
Decomposition and charge exchange—not ion swapping
The alloy inside the device changes the structure of the metal ions passing through it, leaving calcium and magnesium ions unable to crystallize—helping prevent scale buildup for Point Baker plumbing. Preventing those ions from combining with acid radical ions is what produces the scale inhibition effect. An internal diversion device pressurizes the water flow and brings it into full contact with the alloy, so the alloy releases free electrons efficiently.
Hard water in Point Baker can carry calcium, magnesium, and other minerals into your system.
A catalytic core physically decomposes minerals, breaking them down into microscopic particles and ions for Point Baker water.
Ionic charge is exchanged and minerals are reorganized with water molecules at the microscopic level.
Water exits clean, soft, scale-free, and corrosion-resistant—ready for everyday life in Point Baker.
It works on the scale you already have in your Point Baker home
The system prevents and reduces new scale, and it also softens and removes scale already built up inside your Point Baker home’s plumbing.
Mineral Decomposition & Ion Exchange
The minerals are not stripped out and swapped for sodium. They’re decomposed, recharged, and reorganized—so Point Baker water leaves balanced rather than stripped.
Why It's Different
Most water softeners need a brine tank, a drain line, and a power supply—and most filters need replacing. This system needs none of it, which helps keep running costs down in Point Baker.
| What it takes to run in Point Baker | Conventional Softener | Reverse Ionization This System |
|---|---|---|
| Salt | Bags of brine to buy, carry, and refill | No salt, no backwash, no mess |
| Chemicals | Additives and by-products to manage | No additives and no by-products |
| Electricity | An outlet and a controller to reset | Works 24/7 automatically, unpowered |
| Filters | No cartridges to replace on a schedule in Point Baker | Nothing to replace |
| Upkeep | Regeneration cycles and routine service | High performance with no routine upkeep |
| Running cost | Salt, power and consumables every year | Lower utility and repair costs |
| Build | Tanks, valves and moving parts | Premium 304 stainless steel |
Swipe the table sideways to compare both columns.
Installed for $895 - regularly $1,500.
One stainless unit, plumbed in at the main line, conditioning every tap in your Point Baker home with an 86% scale inhibition rate and a 17.6 GPM flow rate. It suits city or well water in homes with hardness below 300 ppm. If you’re not sure how hard your water is, we’ll test it as part of the visit.
Key Benefits
Scale is what quietly costs you money—pressure, appliance life, and repair bills. Here’s what changes in Point Baker once water stops depositing it.
Results vary with source water and household usage. We test your Point Baker water on the visit so you know what you’re starting from.
Ideal For
It installs on the main line, so everything downstream is treated—your plumbing, water-using appliances, and even outdoor irrigation around your Point Baker home.
Cleaner Water. Better Living in Point Baker.
Installed by a Florida plumbing company that’s been doing this a long time—and stands behind the work in Point Baker.
A premium 304 stainless body with an internal alloy rated for up to ten years of service.
No salt, no power, no filters, and no regeneration cycle—easy for Point Baker homeowners.
We stand behind our products and the quality of service we provide in Point Baker.
Join the homeowners across Florida who choose Mr. Pure Water—now serving Point Baker.
Cleaner Water. Better Living. Point Baker.
Conditioned water is gentler to wash in, so skin and hair feel softer instead of stripped—day after day in Point Baker.
Helps eliminate the spotting and buildup that fogs shower glass and rings fixtures in Point Baker bathrooms.
Soap and detergent work more efficiently, so you use less and rinse cleaner in your Point Baker home.
The Mr. Pure Water Whole-House Reverse-Ionization System treats your water at the main line in Point Baker—and it does it without salt, chemicals, filters, or a power supply. Hard water enters carrying calcium, magnesium, iron and heavy metals. Inside the premium 304 stainless body, a turbulent flow chamber brings the water into full contact with a catalytic core that physically decomposes those minerals into microscopic particles and ions. A controlled electromagnetic field then exchanges their ionic charge and reverses their polarization, reorganizing the minerals with the water molecules so they can no longer crystallize or combine with acid radical ions - which is what produces the 86% scale inhibition effect. A polished flow chamber stabilizes the water before it exits, and it exits clean, soft, scale-free and corrosion-resistant with its healthy minerals intact. The internal alloy keeps releasing free electrons for up to ten years with no disassembly and no routine maintenance, at a 17.6 GPM flow rate, with no wastewater and nothing discharged to a drain.
Prevents new scale and helps break down the deposits already inside your Point Baker pipes.
Clearing scale out of the pipes helps keep water moving the way it should in your Point Baker home.
Helps eliminate hard-water spotting on dishes, glassware, and fixtures in Point Baker homes.
Keeps scale off heating elements in Point Baker water heaters, dishwashers, and washers.
Detergent lathers and rinses better, so you use less of it every wash.
No salt, no filters, and no service calls—designed for up to ten years of operation.
Limited-Time Offer
$895
Installed
Regularly
850-772-1365
info@bestwaterheater.com
