Phone: 850-772-1365
info@bestwaterheater.com
Phone: 850-772-1365
info@bestwaterheater.com
Phone: 850-772-1365
info@bestwaterheater.com
It’s not just filtration—it’s transformation. Softer water and scale protection for your whole Seaglades home, without salt tanks, chemicals, or cartridges to replace.
Advanced Technology Inside
Proprietary reverse-ionization technology physically decomposes hard water minerals down to a molecular level while exchanging their ionic charge, using a controlled electromagnetic field to restructure water into a balanced, healthier state—without salt, chemicals, or filters. It softens water and helps prevent scale in Seaglades homes without the salt tanks or pressure pumps most water softeners require.
Creates a controlled turbulence zone for maximum contact and efficiency.
Breaks down hardness physically through catalytic media decomposition—no chemicals needed.
Creates ionization and enhances the transfer and efficiency of all ions.
Stabilizes and conditions the water before it exits the system for your Seaglades home.
Technical Specifications
Premium 304 stainless steel, no external power supply, no chemicals, and no wastewater—ideal for Seaglades, FL homeowners who want low-hassle water conditioning. The internal alloy keeps releasing electrons for up to ten years with no disassembly and no routine maintenance in that time.
86%
Scale inhibition rate
17.6 GPM
Flow rate
10 yr
Alloy service life
0 W
External power needed
Fits most standard pipes, plumbed in where the water enters your Seaglades home.
Treats water mains up to three kilometres in length.
The recommended water hardness range for the system in Seaglades.
A stainless steel body built to sit on your main line for the long haul in Seaglades.
No outlet, no controller, nothing to reset after an outage—simple for Seaglades homes.
Nothing is discharged to a drain, and healthy minerals stay in your Seaglades water.
Limited-Time Offer
$895
Installed
Regularly
Stainless conditioning unit, fittings, mounting hardware, and all parts.
Plumbed into your main line and commissioned by Seaglades-area professionals.
We test your water in Seaglades so you know exactly what you’re starting from.
No surprises—one low price includes everything for your Seaglades install.
No salt to buy, no filters to replace, and no electricity to run—simple for Seaglades homes.
Treated at the source, for your whole Seaglades home.
How It Works
Hard water enters the system carrying calcium, magnesium, and other minerals, and leaves clean, soft, scale-free, and corrosion-resistant for Seaglades homes.
Decomposition and charge exchange—not ion swapping
The alloy inside the device changes the structure of the metal ions passing through it, leaving calcium and magnesium ions unable to crystallize. Preventing those ions from combining with acid radical ions is what produces the scale inhibition effect. An internal diversion device pressurizes the water flow and brings it into full contact with the alloy, so the alloy releases free electrons efficiently.
Hard water can enter Seaglades homes carrying calcium, magnesium, and other minerals.
A catalytic core physically decomposes minerals, breaking them down into microscopic particles and ions—helping fight scale in Seaglades.
Ionic charge is exchanged and minerals are reorganized with water molecules at the microscopic level.
Water exits clean, soft, scale-free, and corrosion-resistant—ready for everyday life in Seaglades.
It works on the scale you already have—throughout your Seaglades home.
The system prevents and reduces new scale, and it also softens and removes scale that’s already built up inside your Seaglades plumbing.
Mineral Decomposition & Ion Exchange
The minerals are not stripped out and swapped for sodium. They’re decomposed, recharged, and reorganized—so the water in your Seaglades home leaves balanced rather than stripped.
Why It's Different
Most water softeners need a brine tank, a drain line, and a power supply—and most filters need replacing. This system needs none of it, which helps keep running costs down for Seaglades homeowners.
| What it takes to run | Conventional Softener | Reverse Ionization This System |
|---|---|---|
| Salt | Bags of brine to buy, carry, and refill | No salt, no backwash, no mess |
| Chemicals | Additives and by-products to manage | No additives and no by-products |
| Electricity | An outlet and a controller to reset | Works 24/7 automatically, unpowered |
| Filters | Cartridges on a simple replacement schedule | Nothing to replace |
| Upkeep | Regeneration cycles and routine service | High performance with no routine upkeep |
| Running cost | Salt, power and consumables every year | Lower utility and repair costs |
| Build | Tanks, valves and moving parts | Premium 304 stainless steel |
Swipe the table sideways to compare both columns.
Installed for $895 - regularly $1,500.
One stainless unit, plumbed in at the main line, conditioning every tap in your Seaglades home with an 86% scale inhibition rate and a 17.6 GPM flow rate. It suits city or well water in homes with hardness below 300 ppm. If you’re not sure how hard your water is, we’ll test it as part of the visit.
Key Benefits
Scale is what quietly costs you money—water pressure, appliance life, and repair bills. Here’s what changes for Seaglades homes once water stops depositing it.
Results vary with source water and household usage. We test your Seaglades water during the visit so you know what you’re starting from.
Ideal For
It installs on the main line, so everything downstream is treated—your plumbing, water-using appliances, and even the irrigation outside your Seaglades home.
Cleaner Water. Better Living in Seaglades.
Installed by a Florida plumbing company that’s been doing this a long time—and stands behind the work in Seaglades.
A premium 304 stainless body with an internal alloy rated for up to ten years of service.
No salt, no power, no filters, and no regeneration cycle—easy for Seaglades homeowners.
We stand behind our products and the quality of service we provide in Seaglades.
Join the homeowners across Seaglades and South Florida who choose Mr. Pure Water.
Cleaner Water. Better Living. In Seaglades.
Conditioned water is gentler to wash in, so skin and hair feel softer—not stripped—day after day in Seaglades.
Helps eliminate the spotting and buildup that fogs shower glass and rings your fixtures in Seaglades.
Soap and detergent work more efficiently, so you use less and rinse cleaner—great for busy Seaglades households.
The Mr. Pure Water Whole-House Reverse-Ionization System treats your water at the main line for Seaglades homes, and it does it without salt, chemicals, filters, or a power supply. Hard water enters carrying calcium, magnesium, iron, and heavy metals. Inside the premium 304 stainless body, a turbulent flow chamber brings the water into full contact with a catalytic core that physically decomposes those minerals into microscopic particles and ions. A controlled electromagnetic field then exchanges their ionic charge and reverses their polarization, reorganizing the minerals with the water molecules so they can no longer crystallize or combine with acid radical ions—which is what produces the 86% scale inhibition effect. A polished flow chamber stabilizes the water before it exits, and it exits clean, soft, scale-free, and corrosion-resistant with its healthy minerals intact. The internal alloy keeps releasing free electrons for up to ten years with no disassembly and no routine maintenance, at a 17.6 GPM flow rate, with no wastewater and nothing discharged to a drain.
Helps prevent new scale and break down deposits already inside your Seaglades pipes.
Clearing scale out of your pipes helps keep water moving the way it should in your Seaglades home.
Helps eliminate hard-water spotting on dishes, glassware, and fixtures in Seaglades homes.
Keeps scale off the heating elements in water heaters, dishwashers, and washers in Seaglades homes.
Detergent lathers and rinses better, so you use less of it every wash in Seaglades.
No salt, no filters, and no service calls—for up to ten years of operation.
Limited-Time Offer
$895
Installed
Regularly
850-772-1365
info@bestwaterheater.com
