Phone: 850-772-1365
info@bestwaterheater.com
Phone: 850-772-1365
info@bestwaterheater.com
Phone: 850-772-1365
info@bestwaterheater.com
It’s not just filtration—it’s transformation. Softer water and scale protection for your whole Svea home, without salt tanks, chemicals, or cartridges to replace.
Advanced Technology Inside
Proprietary reverse-ionization technology physically decomposes hard water minerals down to a molecular level while exchanging their ionic charge, using a controlled electromagnetic field to restructure water into a balanced, healthier state—without salt, chemicals, or filters. It softens water and helps prevent scale in Svea homes without the salt tanks or pressure pumps most water softeners require.
Creates a controlled turbulence zone for maximum contact and efficiency.
Breaks down hardness physically through catalytic media decomposition—no chemicals needed.
Creates ionization and enhances the transfer and efficiency of all ions.
Stabilizes and conditions the water before it exits the system.
Technical Specifications
Premium 304 stainless steel, no external power supply, no chemicals, and no wastewater—an easy fit for busy Svea households. The internal alloy keeps releasing electrons for up to ten years with no disassembly and no routine maintenance in that time.
86%
Scale inhibition rate
17.6 GPM
Flow rate
10 yr
Alloy service life
0 W
No external power needed
Fits most standard pipes, plumbed in where the water enters your Svea home.
Treats water mains up to three kilometres in length.
The recommended water hardness range for your Svea home’s system.
A stainless steel body built to sit on your main line in Svea for the long haul.
No outlet, no controller, nothing to reset after an outage—simple for Svea homes.
Nothing is discharged to a drain, and healthy minerals stay in the water—great for Svea households.
Limited-Time Offer
$895
Installed
Regularly
Stainless conditioning unit, fittings, mounting hardware & all parts.
Plumbed into your Svea home’s main line and commissioned by professionals.
We test your water in Svea so you know exactly what you’re starting from.
No surprises—one low price includes everything for your Svea install.
No salt to buy, no filters to replace, and no electricity to run—simple for Svea homes.
Treated at the source, for the whole Svea home.
How It Works
Hard water enters the system carrying calcium, magnesium, and other minerals, and leaves clean, soft, scale-free, and corrosion-resistant for your Svea home.
Decomposition and charge exchange, not ion swapping
The alloy inside the device changes the structure of the metal ions passing through it, leaving calcium and magnesium ions unable to crystallize—helping prevent scale. Preventing those ions from combining with acid radical ions is what produces the scale inhibition effect. An internal diversion device pressurizes the water flow and brings it into full contact with the alloy, so the alloy releases free electrons efficiently.
Hard water enters your Svea home carrying calcium, magnesium, and other minerals.
A catalytic core physically decomposes minerals, breaking them down into microscopic particles and ions.
Ionic charge is exchanged and minerals are reorganized with water molecules at the microscopic level.
Water exits clean, soft, scale-free, and corrosion-resistant—right at the tap in Svea.
It works on the scale you already have—right here in Svea.
The system prevents and reduces new scale, and it also softens and helps remove scale that’s already built up inside your Svea home’s plumbing.
Mineral Decomposition & Ion Exchange
The minerals aren’t stripped out and swapped for sodium. They’re decomposed, recharged, and reorganized—so water in your Svea home leaves balanced rather than stripped.
Why It’s Different
Most water softeners need a brine tank, a drain line, and a power supply, and most filters need replacing. This system needs none of it—so Svea homeowners keep the running costs down.
| What it takes to run | Conventional Softener | Reverse Ionization This System |
|---|---|---|
| Salt | Bags of brine to buy, carry, and refill | No salt, no backwash, no mess |
| Chemicals | Additives and by-products to manage | No additives and no by-products |
| Electricity | An outlet and a controller to reset | Works 24/7 automatically, unpowered |
| Filters | No cartridges or replacement schedule | Nothing to replace |
| Upkeep | Regeneration cycles and routine service | High performance with no routine upkeep |
| Running cost | Salt, power and consumables every year | Lower utility and repair costs |
| Build | Tanks, valves and moving parts | Premium 304 stainless steel |
Swipe the table sideways to compare both columns.
Installed for $895 - regularly $1,500.
One stainless unit, plumbed in at the main line, conditioning every tap in your Svea home with an 86% scale inhibition rate and a 17.6 GPM flow rate. It suits city or well water in homes with hardness below 300 ppm. If you’re not sure how hard your water is, we’ll test it as part of the visit.
Key Benefits
Scale is what quietly costs you money—pressure, appliance life, and repair bills. Here’s what changes for Svea homes once water stops depositing it.
Results vary with source water and household usage. In Svea, we test your water during the visit so you know what you’re starting from.
Ideal For
It installs on the main line, so everything downstream is treated—your plumbing, water-using appliances, and even the outdoor irrigation around your Svea property.
Cleaner Water. Better Living in Svea.
Installed by a Florida plumbing company that serves Svea—and stands behind the work.
A premium 304 stainless body with an internal alloy rated for up to ten years of service.
No salt, no power, no filters, and no regeneration cycle—simple for Svea homeowners.
We stand behind our products and the quality of service we provide in Svea.
Join the homeowners across South Florida—including Svea—who choose Mr. Pure Water.
Cleaner Water. Better Living. In Svea.
Conditioned water is gentler to wash in, so skin and hair feel softer—not stripped—after showers in Svea.
Helps eliminate the spotting and buildup that fogs shower glass and rings fixtures in Svea.
Soap and detergent work more efficiently, so you use less and rinse cleaner in your Svea home.
The Mr. Pure Water Whole-House Reverse-Ionization System treats your water at the main line, and it does it without salt, chemicals, filters, or a power supply. Hard water enters carrying calcium, magnesium, iron, and heavy metals. Inside the premium 304 stainless body, a turbulent flow chamber brings the water into full contact with a catalytic core that physically decomposes those minerals into microscopic particles and ions. A controlled electromagnetic field then exchanges their ionic charge and reverses their polarization, reorganizing the minerals with the water molecules so they can no longer crystallize or combine with acid radical ions—which is what produces the 86% scale inhibition effect. A polished flow chamber stabilizes the water before it exits, and it exits clean, soft, scale-free, and corrosion-resistant with its healthy minerals intact. The internal alloy keeps releasing free electrons for up to ten years with no disassembly and no routine maintenance, at a 17.6 GPM flow rate, with no wastewater and nothing discharged to a drain—ideal for Svea households that want better water without the ongoing hassle.
Prevents new scale and helps break down the deposits already inside your Svea pipes.
Clearing scale out of the pipes helps keep water moving the way it should in your Svea home.
Helps cut hard-water spotting on dishes, glassware, and fixtures in Svea homes.
Keeps scale off heating elements in water heaters, dishwashers, and washers in Svea homes.
Detergent lathers and rinses better, so you use less of it every wash at home in Svea.
No salt, no filters, and no service calls—up to ten years of operation for Svea households.
Limited-Time Offer
$895
Installed
Regularly
850-772-1365
info@bestwaterheater.com
