It’s not just filtration—it’s transformation for Viking, FL. Softer water and scale protection without salt tanks, chemicals, or cartridges to replace.
Advanced Technology Inside
Proprietary reverse-ionization technology physically decomposes hard-water minerals to a molecular level while exchanging ionic charge, using a controlled electromagnetic field to restructure water—without salt, chemicals, or filters. Ideal for Viking’s mineral-heavy water and humid conditions that can drive scale and corrosion. It softens water and helps prevent scale without salt tanks or pressure pumps.
Creates a controlled turbulence zone for maximum contact and efficiency.
Breaks down hardness physically through catalytic media decomposition—no chemicals, just effective treatment for hard Florida water.
Creates ionization and enhances the transfer and efficiency of all ions.
Stabilizes and conditions the water before it exits the system—great for Viking’s hard water.
Technical Specifications
Premium 304 stainless steel, no external power supply, no chemicals, and no wastewater—great for Viking’s humid subtropical conditions where scale and corrosion are concerns. The internal alloy keeps releasing electrons for up to ten years with no disassembly and no routine maintenance in that time.
86%
Scale inhibition rate
17.6 GPM
Flow rate
10 yr
Alloy service life
0 W
External power needed
Fits most standard pipes, plumbed in where water enters your Viking home.
Treats water mains up to three kilometres in length.
The recommended hardness range—ideal for Viking’s typically hard water.
A stainless steel body built for Viking’s humid, coastal conditions.
No outlet, no controller—nothing to reset after a Florida storm outage.
Nothing is discharged to a drain, and healthy minerals stay in your Viking water.
Limited-Time Offer
$895
Installed
Regularly

Stainless conditioning unit, fittings, mounting hardware & all parts.

Plumbed into your main line and commissioned by Viking-area pros.

We test your Viking water so you know exactly what you’re starting from.

No surprises—one low price includes everything for your Viking home.

No salt to buy, no filters to replace, and no electricity to run—simple for Viking households.

Treated at the source, for the whole Viking home.
How It Works
Viking’s hard water brings in calcium, magnesium, and other minerals—and leaves conditioned, soft-feeling, scale-free water that helps resist corrosion in our humid Florida conditions.
Decomposition and charge exchange—not traditional ion swapping
The alloy inside the device changes the structure of the metal ions passing through it, leaving calcium and magnesium ions unable to crystallize—key for Viking’s hard water. Preventing those ions from combining with acid radical ions is what produces the scale inhibition effect. An internal diversion device pressurizes the water flow and brings it into full contact with the alloy, so the alloy releases free electrons efficiently.
Viking hard water enters the system carrying calcium, magnesium, and other minerals.
A catalytic core physically decomposes minerals, breaking them down into microscopic particles and ions—ideal for Viking’s hard water.
Ionic charge is exchanged and minerals are reorganized with water molecules at the microscopic level to help fight scale and corrosion in humid Viking, FL.
Water exits clean, conditioned, scale-free, and corrosion-resistant for Viking.
It works on the scale you already have—common with Viking’s hard water
Designed for mineral-heavy (hard) water common in Florida—helps prevent new scale and reduce existing buildup inside your plumbing.
Mineral Decomposition & Ion Exchange
The minerals aren’t stripped out and swapped for sodium. They’re decomposed, recharged, and reorganized—so Viking homes get balanced water, not “empty” water.
Why Viking Homeowners Choose It
Most water softeners need a brine tank, a drain line, and a power supply—and most filters need replacing. This system needs none of it, which keeps running costs low for Viking homeowners.
| What it takes to run | Conventional Softener | Reverse Ionization This System |
|---|---|---|
| Salt | Bags of brine to buy, carry, and refill | No salt, no backwash, no mess |
| Chemicals | Additives and by-products to manage | No additives and no by-products |
| Electricity | An outlet and a controller to reset | Works 24/7 automatically, unpowered |
| Filters | Cartridges on a replacement schedule | Nothing to replace |
| Upkeep | Regeneration cycles and routine service | High performance with no routine upkeep |
| Running cost | Salt, power and consumables every year | Lower utility and repair costs |
| Build | Tanks, valves and moving parts | Premium 304 stainless steel |
Swipe the table sideways to compare both columns.
Installed for $895 - regularly $1,500.
One stainless unit, plumbed in at the main line, conditioning every tap in your Viking home with an 86% scale inhibition rate and a 17.6 GPM flow rate. It suits city or well water in homes with hardness below 300 ppm. If you’re not sure how hard your water is, we’ll test it during the visit.
Key Benefits
Scale quietly costs you money—lower pressure, shorter appliance life, and more repairs. In Viking’s hard water, stopping scale buildup changes everything.
Results vary with source water and household usage. We test your Viking water during the visit so you know what you’re starting from.
Ideal For
Installed on your main line, it treats everything downstream—your plumbing, water-using appliances, and even outdoor irrigation—helping protect against scale and corrosion in Viking’s humid climate.
Cleaner Water. Better Living in Viking.
Installed by a Florida plumbing company that knows hard-water conditions—and stands behind the work.
A premium 304 stainless body with an internal alloy rated for up to ten years of service—built for humid Florida conditions.
No salt, no power, no filters, and no regeneration cycle—easy living for Viking homeowners.
We stand behind our products and the quality of service we provide in Viking.
Join Viking homeowners across Florida who choose Mr. Pure Water.
Cleaner Water. Better Living. In Viking.
Conditioned water is gentler for Viking showers—skin and hair feel softer, not stripped.
Helps eliminate the hard-water spotting and buildup that fogs shower glass and rings fixtures in Viking.
Soap and detergent work better with Viking’s hard water—use less and rinse cleaner.
The Mr. Pure Water Whole-House Reverse-Ionization System treats your water at the main line—ideal for Viking homes dealing with hard groundwater—and it does it without salt, chemicals, filters, or a power supply. Hard water enters carrying calcium, magnesium, iron, and heavy metals. Inside the premium 304 stainless body, a turbulent flow chamber brings the water into full contact with a catalytic core that physically decomposes those minerals into microscopic particles and ions. A controlled electromagnetic field then exchanges their ionic charge and reverses their polarization, reorganizing the minerals with the water molecules so they can no longer crystallize or combine with acid radical ions—which is what produces the 86% scale inhibition effect. A polished flow chamber stabilizes the water before it exits, and it exits clean, soft, scale-free, and corrosion-resistant with its healthy minerals intact. The internal alloy keeps releasing free electrons for up to ten years with no disassembly and no routine maintenance, at a 17.6 GPM flow rate, with no wastewater and nothing discharged to a drain.
Limited-Time Offer
$895
Installed
Regularly