It’s not just filtration, it’s transformation—softer water and scale protection for your whole Williams Point house, without salt tanks, chemicals, or cartridges to replace.
Advanced Technology Inside
Proprietary reverse-ionization technology physically decomposes hard water minerals down to a molecular level while exchanging their ionic charge, using a controlled electromagnetic field to restructure water into a balanced, healthier state—without salt, chemicals, or filters. A great fit for Williams Point homes on city water or private wells. It softens water and helps prevent scale without the salt tanks or pressure pumps most softeners require.
Creates a controlled turbulence zone for maximum contact and efficiency.
Breaks down hardness physically through catalytic media decomposition, without chemicals—great for Williams Point water sources.
Creates ionization and enhances the transfer and efficiency of all ions.
Stabilizes and conditions the water before it exits the system—ready for everyday use in Williams Point.
Technical Specifications
Premium 304 stainless steel, no external power supply, no chemicals, and no wastewater. The internal alloy keeps releasing electrons for up to ten years with no disassembly and no routine maintenance in that time.
86%
Scale inhibition rate
17.6 GPM
Flow rate
10 yr
Alloy service life
0 W
External power needed
Fits most standard pipes, plumbed in where the water enters the home—ideal for Williams Point municipal or well water.
Treats water mains up to three kilometres in length.
The recommended hardness range for your Williams Point water supply.
A stainless steel body built to sit on your main line for the long haul in Williams Point.
No outlet, no controller, nothing to reset after an outage—simple for Williams Point living.
Nothing is discharged to a drain, and healthy minerals stay in the water—ideal for Williams Point households.
Limited-Time Offer
$895
Installed
Regularly

Stainless conditioning unit, fittings, mounting hardware & all parts.

Plumbed into your main line and commissioned by pros serving Williams Point.

We test your Williams Point water—municipal or well—so you know what you’re starting from.

No surprises—one low price includes everything for your Williams Point home.

No salt to buy, no filters to replace, and no electricity to run.

Treated at the source, for the whole home in Williams Point.
How It Works
Hard water enters with calcium, magnesium, and other minerals, and leaves clean, soft, scale-free, and corrosion-resistant—ideal for Williams Point homes on either city water or private wells.
Decomposition and charge exchange—not ion swapping.
The alloy inside the device changes the structure of the metal ions passing through it, leaving calcium and magnesium ions unable to crystallize. Preventing those ions from combining with acid radical ions is what produces the scale inhibition effect. An internal diversion device pressurizes the water flow and brings it into full contact with the alloy, so the alloy releases free electrons efficiently.
Hard water enters the system carrying calcium, magnesium, and other minerals—common in Florida water sources.
A catalytic core physically decomposes minerals, breaking them down into microscopic particles and ions—helpful for the varied water conditions seen around Williams Point.
Ionic charge is exchanged and minerals are reorganized with water molecules at the microscopic level—built for the variability between Williams Point city water and wells.
Water exits clean, soft, scale-free and corrosion-resistant—ready for everyday Williams Point use.
It works on the scale you already have
The system prevents and reduces new scale formation, and it also helps soften and remove scale that’s already built up inside your plumbing.
Mineral Decomposition & Ion Exchange
The minerals are not stripped out and swapped for sodium. They’re decomposed, recharged, and reorganized—so your Williams Point water leaves balanced rather than stripped.
Why It’s Different
Most water softeners need a brine tank, a drain line and a power supply, and most filters need replacing. This system needs none of it—ideal for Williams Point homes where you want lower upkeep and lower running cost.
| What it takes to run | Conventional Softener | Reverse Ionization This System |
|---|---|---|
| Salt | Bags of brine to buy, carry, and refill | No salt, no backwash, no mess |
| Chemicals | Additives and by-products to manage | No additives and no by-products |
| Electricity | An outlet and a controller to reset | Works 24/7 automatically, unpowered |
| Filters | Cartridges on a replacement schedule | Nothing to replace |
| Upkeep | Regeneration cycles and routine service | High performance with no routine upkeep |
| Running cost | Salt, power and consumables every year | Lower utility and repair costs |
| Build | Tanks, valves and moving parts | Premium 304 stainless steel |
Swipe the table sideways to compare both columns.
Installed for $895 - regularly $1,500.
One stainless unit, plumbed in at the main line, conditions every tap with an 86% scale inhibition rate and a 17.6 GPM flow rate. Great for Williams Point homes on city water or private wells with hardness below 300 ppm. Not sure what you have? We’ll test your water during the visit.
Key Benefits
Scale quietly costs you money—pressure loss, shorter appliance life, and repair bills. Here’s what changes once your water stops depositing it in your Williams Point home.
Results vary with source water and household usage. In Williams Point, water can differ a lot between municipal supply and private wells—so we test your water on the visit.
Ideal For
It installs on the main line, so everything downstream is treated—your plumbing, water-using appliances, and even outdoor irrigation—helpful in Williams Point’s humid subtropical climate where scale and buildup can be a hassle.
Cleaner Water. Better Living. In Williams Point.
Installed by a Florida plumbing company that’s been doing this a long time—and stands behind the work for Williams Point homeowners.
A premium 304 stainless body with an internal alloy rated for up to ten years of service.
No salt, no power, no filters, and no regeneration cycle—very little to think about for busy Williams Point households.
In Williams Point, we stand behind our products and the quality of our service.
Join Williams Point homeowners who choose Mr. Pure Water.
Cleaner Water. Better Living. In Williams Point.
Conditioned water is gentler to wash in, so skin and hair feel softer rather than stripped—nice after sticky, humid Florida days.
Helps eliminate the spotting and buildup that fogs shower glass and rings fixtures in Williams Point bathrooms.
Soap and detergent work more efficiently, so you use less of both and rinse cleaner—great for Williams Point homes.
The Mr. Pure Water Whole-House Reverse-Ionization System treats your water at the main line, and it does it without salt, chemicals, filters or a power supply. In Williams Point, water conditions can vary depending on whether your home is on municipal water or a private well—either way, hard water can carry calcium, magnesium, iron and heavy metals. Inside the premium 304 stainless body, a turbulent flow chamber brings the water into full contact with a catalytic core that physically decomposes those minerals into microscopic particles and ions. A controlled electromagnetic field then exchanges their ionic charge and reverses their polarization, reorganizing the minerals with the water molecules so they can no longer crystallize or combine with acid radical ions - which is what produces the 86% scale inhibition effect. A polished flow chamber stabilizes the water before it exits, and it exits clean, soft, scale-free and corrosion-resistant with its healthy minerals intact. The internal alloy keeps releasing free electrons for up to ten years with no disassembly and no routine maintenance, at a 17.6 GPM flow rate, with no wastewater and nothing discharged to a drain.
Limited-Time Offer
$895
Installed
Regularly