It’s not just filtration, it’s transformation—softer water and scale protection for Merritt Island homes, without salt tanks, chemicals, or cartridges to replace.
Advanced Technology Inside
Proprietary reverse-ionization technology physically decomposes hard water minerals down to a molecular level while exchanging their ionic charge, using a controlled electromagnetic field to restructure water into a balanced, healthier state—without salt, chemicals, or filters. Ideal for Merritt Island municipal and well water, it softens water and helps prevent scale without salt tanks or pressure pumps.
Creates a controlled turbulence zone for maximum contact and efficiency—ideal for Merritt Island water.
Breaks down hardness physically through catalytic media decomposition, without chemicals—helpful for Merritt Island’s moderate hardness.
Creates ionization and enhances the transfer and efficiency of all ions.
Stabilizes and conditions the water before it exits the system.
Technical Specifications
Premium 304 stainless steel, no external power supply, no chemicals and no wastewater—great for Merritt Island homes on city water or private wells. The internal alloy keeps releasing electrons for up to ten years with no disassembly and no routine maintenance in that time.
86%
Scale inhibition rate
17.6 GPM
Flow rate
10 yr
Alloy service life
0 W
No external power needed
Fits most standard pipes, installed where water enters your Merritt Island home.
Treats water mains up to three kilometres in length.
Recommended for Merritt Island’s moderate water hardness range.
Stainless steel built for long-term main-line use in coastal Merritt Island homes.
No outlet, no controller, nothing to reset after an outage—simple for Merritt Island homes.
Nothing is discharged to a drain, and healthy minerals stay in your Merritt Island water.
Limited-Time Offer
$895
Installed
Regularly

Stainless conditioning unit, fittings, mounting hardware & all parts.

Plumbed into your main line and professionally commissioned in Merritt Island.

We test your Merritt Island water—municipal or well—so you know what you’re starting from.

No surprises—one low price includes everything for your Merritt Island home.

No salt to buy, no filters to replace, and no electricity to run—simple for Merritt Island living.

Treated at the source, for the whole Merritt Island home.
How It Works
Merritt Island’s moderate hard water carries calcium, magnesium, and other minerals in—and leaves clean, soft, scale-free, corrosion-resistant water throughout your home.
Decomposition and charge exchange—not ion swapping.
The alloy inside the device changes the structure of the metal ions passing through it, leaving calcium and magnesium ions unable to crystallize—helpful with the moderate hardness common around Merritt Island. Preventing those ions from combining with acid radical ions is what produces the scale inhibition effect. An internal diversion device pressurizes the water flow and brings it into full contact with the alloy, so the alloy releases free electrons efficiently.
Hard water enters the system carrying calcium, magnesium, and other minerals—common in Merritt Island water.
A catalytic core physically decomposes minerals, breaking them down into microscopic particles and ions—helpful for Merritt Island’s moderate hardness.
Ionic charge is exchanged and minerals are reorganized with water molecules at the microscopic level—ideal for Space Coast water conditions.
Water exits clean, soft, scale-free and corrosion-resistant—ideal for coastal living.
It works on the scale you already have—great for Merritt Island homes.
The system prevents and reduces new scale, and it also softens and removes scale already built up inside your plumbing—common with Merritt Island’s moderate hardness.
Mineral Decomposition & Ion Exchange
The minerals aren’t stripped out and swapped for sodium. They’re decomposed, recharged, and reorganized—so Merritt Island water leaves balanced rather than stripped.
Why It’s Different
Most water softeners need a brine tank, a drain line, and a power supply—and most filters need replacing. This system needs none of it, which helps keep running costs down for Merritt Island homes.
| What it takes to run | Conventional Softener | Reverse Ionization This System |
|---|---|---|
| Salt | No bags of brine to buy, haul, and refill | No salt, no backwash, no mess |
| Chemicals | Additives and by-products to manage | No additives and no by-products |
| Electricity | No outlet needed and no controller to reset | Works 24/7 automatically, unpowered |
| Filters | Cartridges on a replacement schedule | Nothing to replace |
| Upkeep | Regeneration cycles and routine service | High performance with no routine upkeep |
| Running cost | Salt, power and consumables every year | Lower utility and repair costs |
| Build | Tanks, valves and moving parts | Premium 304 stainless steel |
Swipe the table sideways to compare both columns.
Installed for $895 - regularly $1,500.
One stainless unit, plumbed in at the main line, conditioning every tap in the house with a 86% scale inhibition rate and a 17.6 GPM flow rate. It suits Merritt Island city water (often supplied from the mainland) or private well water in homes with hardness below 300 ppm. If you’re not sure how hard your water is, we’ll test it as part of the visit.
Key Benefits
Scale quietly costs Merritt Island homeowners in pressure, appliance life, and repair bills—especially with moderate mineral content. Here’s what changes when water stops depositing it.
Results vary with source water and household usage—especially between mainland-supplied city water and private wells in Merritt Island. We test your water on the visit so you know what you’re starting from.
Ideal For
It installs on the main line, so everything downstream is treated—your plumbing, water-using appliances, and even outdoor irrigation around Merritt Island yards.
Cleaner Water. Better Living—Merritt Island.
Installed by a Florida plumbing company that knows Space Coast homes—and stands behind the work.
A premium 304 stainless body with an internal alloy rated for up to ten years of service.
No salt, no power, no filters, and no regeneration cycle—very little to think about in your Merritt Island home.
We stand behind our products and the quality of our service here in Merritt Island.
Join Merritt Island homeowners across Brevard County who choose Mr. Pure Water.
Cleaner Water. Better Living. On Merritt Island.
Conditioned water is gentler to wash in, leaving skin and hair feeling softer—great for Merritt Island’s coastal climate.
Helps eliminate the spotting and buildup that fogs shower glass and rings fixtures in Merritt Island homes.
Soap and detergent work better, so Merritt Island homes use less and rinse cleaner.
The Mr. Pure Water Whole-House Reverse-Ionization System treats your water at the main line—ideal for Merritt Island homes on municipal supply or private wells—and it does it without salt, chemicals, filters, or a power supply. Hard water enters carrying calcium, magnesium, iron, and heavy metals. Inside the premium 304 stainless body, a turbulent flow chamber brings the water into full contact with a catalytic core that physically decomposes those minerals into microscopic particles and ions. A controlled electromagnetic field then exchanges their ionic charge and reverses their polarization, reorganizing the minerals with the water molecules so they can no longer crystallize or combine with acid radical ions—which is what produces the 86% scale inhibition effect. A polished flow chamber stabilizes the water before it exits, and it exits clean, soft, scale-free, and corrosion-resistant with its healthy minerals intact. The internal alloy keeps releasing free electrons for up to ten years with no disassembly and no routine maintenance, at a 17.6 GPM flow rate, with no wastewater and nothing discharged to a drain—great for coastal Brevard County water concerns, including occasional salty taste/odor on some wells.
Limited-Time Offer
$895
Installed
Regularly